| |
|
|
RC1-1514-000CN
Sensor lever - Lever that activates dulexing paper feed sensor (PS10)
|
C5870-40024
OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide
|
RC1-0161-000CN
Paper size sensing flag - White plastic arm used as mechanical link to tray size sensor PC Board - Three used per sensing assembly
|
|
|
RC1-0060-030CN
Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
|
RG5-6305-000CN
Registration flag and sensor holder assembly - Activates the document registration sensor on the sensor board on top of the registration guide assembly in the ADF main assembly
|
RM1-3743-000CN
Face down flag assembly - Goes on the top cover assembly
|
C2890-40108
OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
|
|
|
RC1-7410-000CN
Paper sensor flag for Tray 2 paper pickup assembly - Located on paper pickup roller shaft.
|
FB5-5937-020CN
Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate
|
|
|
RB2-6036-000CN
Sensor flag - Short rod with two flat flags and a curved end flag
|
RB1-7501-020CN
Paper feed sensor flag - Black plastic shaft with two arms on it (One is moved by the feeding paper, the other activates the photo sensor) - Mounts under the top plate on the 250-sheet paper feeder assembly base unit
|
|
|
RG5-6290-000CN
Sensor flag - Sensor activator half of the sensor flag for detecting when the ADF input tray is empty - Flag part passes through the 'empty tray' photo-sensor
|
|
|
|
|
RM1-0012-020CN
Paper feed assembly - Includes torsion spring and paper feed roller assembly
|
RL1-0015-000CN
Kicker assembly - Mounts to right side of the printer and is connected to the right side guide - Senses when the paper cassette is inserted into the printer
|
RB2-8002-000CN
Flag lever - Lever half of the sensor flag for detecting when the ADF input tray is empty - Flag part hangs down at the entrance to the ADF paper pickup assembly
|
RB2-6035-000CN
Sensor flag - Long rod with forked flag toward one end and curved flag at the other
|
|
|
|
|
RB2-7978-000CN
Flag lever - Sensor activator half of the sensor flag for detecting when the ADF input tray is empty - Activates the sensor on the rear wall of the ADF paper pickup assembly
|
RG5-6306-020CN
Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used)
|
|
|
C5374-40068
Pen door flag - Attached to sensor PC board - Used to detect an open cartridge access door
|
RB2-7964-000CN
ADF open flag - Quarter round plastic flag on a short arm - Activates the photo-sensor when the ADF assembly is open - Mounts on the front frame of the ADF paper pickup assembly
|
|
|
RG5-6306-000CN
Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used)
|
|
|
C6426-40052
OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide
|
RB2-9925-000CN
Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
|
|