Filter Parts:
search:
|
Accessory
|
0
CH971-62824
|
CH971-62824
#Accessory,#Parts,#CH971-62824
Adhesive backed ruler - English metric ruler - 2.5m (98-inches) long and can be cut down for the 1.6m (64-inches) size - This is the ruler located with the N-up alignment pins
|
|
0
CH971-63114
|
CH971-63114
#Accessory,#Parts,#CH971-63114
High Density Polyethylene (HDPE) funnel - 32Oz capacity - Facilitates emptying ShopVac waste ink into waste ink bottle
|
|
Accessory Kit
|
|
0
CH971-56881
|
CH971-56881
#Accessory Kit,#Parts,#CH971-56881
Accessory kit for the support tables - Includes all the fasteners, casters, etc needed to assemble two tables - For use with the Scitex FB910/FB950 printers
|
|
Actuator
|
|
0
CH109-67003
|
CH109-67003
#Actuator,#Parts,#CH109-67003
Lift motor (actuator) - Used for all up/down component movement in the printer - This motor is used in nine locations on the printer
|
|
0
CQ114-67068
|
CQ114-67068
#Actuator,#Parts,#CQ114-67068
Lifting actuator for the rail - For the Scitex FB500/FB700 printer
|
|
0
CQ114-67094
|
CQ114-67094
#Actuator,#Parts,#CQ114-67094
75mm stroke actuator assembly - This is the actuator and all associated bracketry and hardware plus the lift encoder reader and strip - Used for the input and output media hold-down rollers and the alignment bar - For the Scitex FB500/FB700/FB950 printers
|
|
Bar
|
|
0
CH154-50002
|
CH154-50002
#Bar,#Parts,#CH154-50002
Ionizer bar - Includes the bar with cable only - Attaches to the input side of the rail - For use with the Scitex FB950 printer
|
|
0
CH971-57513
|
CH971-57513
#Bar,#Parts,#CH971-57513
Bar media guide - This bar is lowered down to stop and square the media
|
|
0
CH971-91490
|
CH971-91490
#Bar,#Parts,#CH971-91490
Y-axis alignment bar - Includes fine-thread screws for adjusting the Y-axis alignment of the printheads - Located in front of the printheads
|
|
0
CQ115-67012
|
CQ115-67012
#Bar,#Parts,#CQ115-67012
Anti-static ionizer bar - For the Scitex FB700 printers
|
|
Belt
|
|
0
CH154-67003
|
CH154-67003
#Belt,#Parts,#CH154-67003
Main carriage drive belt (Blue) - For use with Scitex FB950 printers
|
23377
CH971-90710
|
CH971-90710
#Belt,#Parts,#CH971-90710
Carriage drive timing belt - Located between the carriage drive motor and the carriage drive shaft. Carriage Drive Timing Belt For HP DJ H35100 H35500 H45500 H45100 and similar Scitex Designjet model family types.
|
|
0
CH971-91462
|
CH971-91462
#Belt,#Parts,#CH971-91462
Media belt - Includes all the support pieces and accessories used to change the belt - For use with the Scitex FB950/FB910 printers
|
|
0
CH971-91530
|
CH971-91530
#Belt,#Parts,#CH971-91530
Drive belt - Used for the service station wiper motion
|
|
Blower Assembly
|
|
0
CH971-91400
|
CH971-91400
#Blower Assembly,#Parts,#CH971-91400
Belt vacuum blower assembly - Includes one blower - Used to suck down media to belt - For the FB500/FB700/FB950/FB910
|
|
111566
CQ114-67238
|
CQ114-67238
#Blower Assembly,#Parts,#CQ114-67238
Frmblwrblt Vacalt HP SCITEX FB500 FB700 FB910 FB950 GENUINE
|
|
Bottle
|
|
0
CH154-67014
|
CH154-67014
#Bottle,#Parts,#CH154-67014
Waste ink bottle - One gallon bottle with warning label for collection of UV liquid wastes
|
|
0
CH154-67015
|
CH154-67015
#Bottle,#Parts,#CH154-67015
Flush bottle - Squeeze bottle with label for UV flush
|
|
Box
|
|
0
CJ848A
|
CJ848A
#Box,#Parts,#CJ848A
Electronics assembly (ebox assembly) - For use with the Scitex FB950
|
|
Bracket
|
|
0
CH108-60008
|
CH108-60008
#Bracket,#Parts,#CH108-60008
L-bracket and internal mechanical - Located on the on the output, user end of the printer - Includes the parts that transfer take-up motor power to the take-up spool (does not include the motor/switch assembly, the takeup drive belt, or the belt cover)
|
|
0
CH108-60009
|
CH108-60009
#Bracket,#Parts,#CH108-60009
L-bracket - Located on the output, service end of the printer
|
|
0
CH108-60010
|
CH108-60010
#Bracket,#Parts,#CH108-60010
L-bracket - Located on the input, user end of the printer - Holds the supply roll and inactive foam rollers
|
|
0
CH108-60011
|
CH108-60011
#Bracket,#Parts,#CH108-60011
L-bracket - Located on the input, service end of the printer - Holds the supply roll and inactive foam rollers
|
|
0
CH971-57219
|
CH971-57219
#Bracket,#Parts,#CH971-57219
Carriage drive bracket - For use with Designjet H series and Scitex FB910/FB950 printers
|
|
0
CH971-57259
|
CH971-57259
#Bracket,#Parts,#CH971-57259
Service-end bracket - Supports the lift and press rollers in the roll-to-roll option
|
|
Brush
|
|
0
CH971-62665
|
CH971-62665
#Brush,#Parts,#CH971-62665
Brass wire brush - Used to clean the ionizer bar
|
|
0
CQ114-67180
|
CQ114-67180
#Brush,#Parts,#CQ114-67180
Ionizer brush - Used to clean the points on the anti-static ionizer bar
|
|
Bumper
|
|
0
CH971-62205
|
CH971-62205
#Bumper,#Parts,#CH971-62205
Polyurethane rubber bumper - 7/16-inch diameter x 13/64-inch thick round, adhesive-backed bumper - Used on some platforms on the rail at the carriage home, or as a spacer on the headboard-end of the LVDS cable (on Scitex FB500/FB700 printers only)
|
|
Button
|
|
0
CH971-91398
|
CH971-91398
#Button,#Parts,#CH971-91398
Emergency stop button - For use with Scitex FB950/FB910 printers
|
|
Cable
|
|
0
CH154-67009
|
CH154-67009
#Cable,#Parts,#CH154-67009
UV lamp power cable - Cable goes from the electronics assembly to one lamp - For use with Scitex FB500/FB700/FB950
|
|
0
CH971-50014
|
CH971-50014
#Cable,#Parts,#CH971-50014
Cable assembly - Braided ribbon cable from OHS board to I/O board - For the Scitex FB500/FB700/FB910/FB950 printers
|
|
0
CH971-50028
|
CH971-50028
#Cable,#Parts,#CH971-50028
Cable - Goes from the three pin sabre connector on the AC distribution board to an AC receptacle
|
|
0
CH971-50116
|
CH971-50116
#Cable,#Parts,#CH971-50116
Cable - Goes from the AC filter to the power distribution board
|
|
0
CH971-50148
|
CH971-50148
#Cable,#Parts,#CH971-50148
Cable assembly - Cable between the headboard and the UV lamp - For the Scitex FB950 and the Designjet H-Series
|
|
0
CH971-50163
|
CH971-50163
#Cable,#Parts,#CH971-50163
Cable harness - Goes from the OHS board to the ink pumps
|
|
0
CH971-50284
|
CH971-50284
#Cable,#Parts,#CH971-50284
Cable - Goes from the UV power supply to the external connector for the UV lamp cable found on the top side of the electronics box
|
|
0
CH971-50286
|
CH971-50286
#Cable,#Parts,#CH971-50286
Cable assembly - 2-wire cable - Ties in to the power cable for the UV lamp cable receptacle on the exterior of the electronics box
|
|
0
CH971-50289
|
CH971-50289
#Cable,#Parts,#CH971-50289
Cable assembly - 2-wire cable - Ties in to the power cable for the UV lamp cable receptacle on the exterior of the electronics box
|
|
0
CH971-50299
|
CH971-50299
#Cable,#Parts,#CH971-50299
Cable assembly - Goes from the power distribution board to the external receptacle for take-up motor power
|
|
0
CH971-50300
|
CH971-50300
#Cable,#Parts,#CH971-50300
Internal ebox cable - Goes from the AC distribution board to the UVPS and AC relay - Has a 4-pin molex sabre connector for the AC distribution board connection
|
|
0
CH971-50316
|
CH971-50316
#Cable,#Parts,#CH971-50316
Camera fans cable - Goes from the upper HDBD connector to the rear carriage fans
|
|
0
CH971-50322
|
CH971-50322
#Cable,#Parts,#CH971-50322
Cable assembly - Goes from the headboard to the carriage home sensor
|
|
0
CH971-50354
|
CH971-50354
#Cable,#Parts,#CH971-50354
Internal ebox cable assembly - Cable that goes from the I/O board J28 to AC relays, cooling fans, main power switch, foot pedal, and UV cable-present sensor
|
|
0
CH971-50364
|
CH971-50364
#Cable,#Parts,#CH971-50364
Cable assembly - 2-wire cable - Goes from the UV power supply to the cable harness from the I/O board
|
|
0
CH971-50404
|
CH971-50404
#Cable,#Parts,#CH971-50404
Cable assembly - Goes from the lower HDBD connector to the front carriage fans and color sensor fan
|
|
0
CH971-52323
|
CH971-52323
#Cable,#Parts,#CH971-52323
Cable - Used to connect the printer directly to a print server - For use without a hub
|
|
0
CH971-55682
|
CH971-55682
#Cable,#Parts,#CH971-55682
Cable assembly - Goes from the I/O board to the motor control board
|
|
0
CH971-57303
|
CH971-57303
#Cable,#Parts,#CH971-57303
Cable - Goes from the headboard to the air valve assembly
|
|
0
CH971-57465
|
CH971-57465
#Cable,#Parts,#CH971-57465
Cable - Goes from the external power receptacle for the ionizer power supply to the I/O board and power distribution board
|
|
0
CQ114-67051
|
CQ114-67051
#Cable,#Parts,#CQ114-67051
Serial data cable - Touch-sensitive data transmission cable - Located between the LCD control panel and the I/O board
|
|
0
CQ114-67052
|
CQ114-67052
#Cable,#Parts,#CQ114-67052
VGA cable - Located between the LCD control panel and the motherboard - For the video display
|
|
113852
CQ114-67128
|
CQ114-67128
#Cable,#Parts,#CQ114-67128
LVDS data cable - For use with the Scitex FB950 printer
|
|
113851
CQ114-67243
|
CQ114-67243
#Cable,#Parts,#CQ114-67243
Frm-Fb500/700-Igus-Data-Cable
|
|
Camera
|
|
0
CH971-91605
|
CH971-91605
#Camera,#Parts,#CH971-91605
Camera assembly - For use with Scitex FB950 and the Designjet H-series
|
|
Cap
|
|
0
CH971-57560
|
CH971-57560
#Cap,#Parts,#CH971-57560
End cap sheet metal - Located on the service end of the printer - For use with the Scitex FB950 printer
|
|
0
CH971-91589
|
CH971-91589
#Cap,#Parts,#CH971-91589
Printhead cap - Used to cap a printhead port or similar luer fitting location
|
|
0
CH971-91590
|
CH971-91590
#Cap,#Parts,#CH971-91590
Tube cap - Used to cap the end of the luer fitting that normally connects to the ink tube
|
|
Carriage
|
|
0
CH971-91497
|
CH971-91497
#Carriage,#Parts,#CH971-91497
Carriage headboard assembly - For use with the Designjet H-Series and Scitex FB950 printer
|
|
0
CH971-91502
|
CH971-91502
#Carriage,#Parts,#CH971-91502
Carriage drive assembly with bracket - For use with Scitex FB950/FB950 and Designjet H series
|
|
112568
CQ114-67109
|
CQ114-67109
#Carriage,#Parts,#CQ114-67109
Carriage drive assembly - Includes bracket, motor, drive shaft, timing belt, and all related fasteners - For the Scitex FB500/FB700 printer
|
|
Clamp
|
|
0
CH971-57723
|
CH971-57723
#Clamp,#Parts,#CH971-57723
Clamps - Does not in include the fastener - Secures the main (Blue) drive belt to the (Black) clips in the carriage
|
|
Cleaner
|
|
111562
CH151A
|
CH151A
#Cleaner,#Parts,#CH151A
lamp filters is suitable for HP FB950 printers. This is HP original part (number CH151A). Each filter is 14.3cm long 8.3cm wide and 0.3cm thick.
|
|
Clip
|
|
0
CH154-67045
|
CH154-67045
#Clip,#Parts,#CH154-67045
Clip assembly - Includes one unit, does not include the taller luer cap required for use with the clamp - Used on the printhead ink U-tubes - For use with Designjet H-series and Scitex FB950
|
|
0
CH971-91001
|
CH971-91001
#Clip,#Parts,#CH971-91001
Clip - Connected to the trolley and provides attachment points for the carriage drive belt on both ends
|
|
Collar
|
|
0
1500-1274
|
1500-1274
#Collar,#Parts,#1500-1274
Internal clamping collar - 25mm diameter - Used on the ends of the media drive idle roller shaft - For the Scitex FB910/FB950/FB500/FB700 printers
|
|
0
CH971-91264
|
CH971-91264
#Collar,#Parts,#CH971-91264
Spool-holding collar - Attaches to the stand on the left side take-up and supply postions (when facing front of printer)
|
|
0
CH971-91265
|
CH971-91265
#Collar,#Parts,#CH971-91265
Spool-holding collar - attaches to the stand on the right side take-up and supply postions (when facing front of printer)
|
|
Connector
|
|
0
CH971-57327
|
CH971-57327
#Connector,#Parts,#CH971-57327
Complete ink tube/filter/connectors assembly - Used with the ink boxes - For use with Scitex FB950/FB500/FB700 and Designjet H (CS 5400uv) printers
|
|
Coupler
|
|
0
CH971-91634
|
CH971-91634
#Coupler,#Parts,#CH971-91634
Off-Head Supply (OHS) ink coupler - Includes one coupling and the nut used to secure it on the printer - This is the quick-disconnect attachment for the ink boxes and receives the connector from the inkbox pigtail
|
|
Display
|
|
0
CH154-60033
|
CH154-60033
#Display,#Parts,#CH154-60033
LCD display assembly - For use with Scitex FB950 printers only
|
|
Drive Assembly
|
|
0
CH154-67038
|
CH154-67038
#Drive Assembly,#Parts,#CH154-67038
Hard disk drive (HDD) - Used in the electronics assembly - For use with the Scitex FB950 printer
|
|
Enclosure
|
|
0
CH154-00013
|
CH154-00013
#Enclosure,#Parts,#CH154-00013
Belt/roller enclosure - Located on the output-side of the user-end
|
|
0
CH154-67012
|
CH154-67012
#Enclosure,#Parts,#CH154-67012
Window enclosure - Includes pushnuts - Replacement UV-blocking windows used only on the center output-side door - For the Scitex FB500/FB700/FB950
|
|
0
CH971-57557
|
CH971-57557
#Enclosure,#Parts,#CH971-57557
Central top enclosure assembly - Includes the window material and fasteners - Located on the input side of the printer
|
|
0
CH971-57559
|
CH971-57559
#Enclosure,#Parts,#CH971-57559
Full enclosure skins - For use on the user side of the printer - For use with the Scitex FB950 printer
|
|
0
CH971-57580
|
CH971-57580
#Enclosure,#Parts,#CH971-57580
Central top enclosure assembly - Includes all fans, windows, light blocking skirt, and required fasteners - Located on the output side of the printer (top cover that can be opened)
|
|
0
CH971-57585
|
CH971-57585
#Enclosure,#Parts,#CH971-57585
Belt/roller enclosure - Located on the user-end (input-side)
|
|
0
CH971-57586
|
CH971-57586
#Enclosure,#Parts,#CH971-57586
Belt/roller enclosure - Located on the service-end (input-side)
|
|
0
CJ856A
|
CJ856A
#Enclosure,#Parts,#CJ856A
Carriage cover enclosure - Includes the fans - For use with the Scitex FB950 printer
|
|
Encoder
|
|
0
CH154-67005
|
CH154-67005
#Encoder,#Parts,#CH154-67005
Encoder strip actuator assembly - Includes bracket - Used in all lifting assemblies and service station - For the Scitex FB950 printer
|
|
0
CH154-67040
|
CH154-67040
#Encoder,#Parts,#CH154-67040
High-resolution on-shaft encoder - Used for media drive motion - For use with the Scitex FB950 printer
|
|
0
CH971-90708
|
CH971-90708
#Encoder,#Parts,#CH971-90708
Encoder reader assembly - Located on the back of the carriage assembly
|
|
0
CH971-91407
|
CH971-91407
#Encoder,#Parts,#CH971-91407
Media drive encoder - Attaches to the belt drive motor on the service end of the printer - Does not include the high-resolution encoder - For the Scitex FB500/FB700/FB950/FB910
|
|
106467
CH971-91425
|
CH971-91425
#Encoder,#Parts,#CH971-91425
Mylar encoder strip and foam tape - It is long enough for a 2.5m (98-inch) printer and can be trimmed down for smaller printers - Part requires you to reuse the existing aluminum bar from the old strip
|
|
Fan
|
|
0
CH154-67010
|
CH154-67010
#Fan,#Parts,#CH154-67010
Cooling fan - Used on the carriage (all four locations) and the Designjet H image sensor - For use with Scitex FB950 printers only
|
|
0
CH971-91513
|
CH971-91513
#Fan,#Parts,#CH971-91513
Fan assembly - Cools the electronics box in the printer
|
|
0
CH971-91596
|
CH971-91596
#Fan,#Parts,#CH971-91596
UV lamp housing cooling fan - For the Scitex FB500/FB700/FB950, and Designjet H-series printers
|
|
0
CH971-91599
|
CH971-91599
#Fan,#Parts,#CH971-91599
Fan assembly - Located on the top enclosure and end enclosures - For the Scitex FB500/FB700, also the Designjet H-Series
|
|
Filter
|
|
0
CH104-67020
|
CH104-67020
#Filter,#Parts,#CH104-67020
Tube/filter/fitting assembly - Used between the printhead and the air manifold
|
|
0
CH108-60004
|
CH108-60004
#Filter,#Parts,#CH108-60004
Large cylindrical air filter - Located on the exterior of the vacuum assembly
|
|
0
CH971-60050
|
CH971-60050
#Filter,#Parts,#CH971-60050
AC filter - Located inside the electronics assemblies - For use with Scitex FB910/FB950 printers
|
|
0
CH971-91504
|
CH971-91504
#Filter,#Parts,#CH971-91504
Ink filter - 1.74-inch diameter - Can be used with any ink color - This filter is used in the OHS area of the printer - For use with Scitex FB950 and Designjet H-Series
|
|
0
CH971-91644
|
CH971-91644
#Filter,#Parts,#CH971-91644
Replacement filter - Includes media and mesh used inside the ShopVac, as well as related fasteners - For the Scitex FB500/FB700 printers
|
|
0
CQ114-67188
|
CQ114-67188
#Filter,#Parts,#CQ114-67188
Replacement filter - Includes media and mesh used inside the ShopVac, as well as related fasteners - For the Scitex FB500/FB700 printers
|
|
Glass Assembly
|
|
0
CH971-91594
|
CH971-91594
#Glass Assembly,#Parts,#CH971-91594
Quartz lamp glass - Inserts below the left or right lamp housing - For the FB500/FB700/FB950 also the Designjet H-Series
|
|
Guard
|
|
0
CH154-00020
|
CH154-00020
#Guard,#Parts,#CH154-00020
Media belt edge guard - Located on the user side - For use with the Scitex FB950 printer
|
|
0
CH154-00021
|
CH154-00021
#Guard,#Parts,#CH154-00021
Media belt edge guard - Located on the service side - For use with the Scitex FB950 printer
|
|
0
CH971-57318
|
CH971-57318
#Guard,#Parts,#CH971-57318
Finger guard - Located on the service-end (input-side) over the belt on engines without the roll-to-roll option
|
|
0
CH971-57605
|
CH971-57605
#Guard,#Parts,#CH971-57605
Finger guard - Includes a white media alignment fence on engines without the roll-to-roll option - Located on the user-end (input-side)
|
|
0
CH971-57691
|
CH971-57691
#Guard,#Parts,#CH971-57691
Finger guard with media alignment fence (White) - Located on the user-end (input-side) engines without the roll-to-roll option
|
|
Hardware
|
|
0
CH154-60013
|
CH154-60013
#Hardware,#Parts,#CH154-60013
Float switch assembly - Includes brackets - Used in the service station - For the Scitex FB500/FB700/FB950 printer
|
|
0
CH154-67001
|
CH154-67001
#Hardware,#Parts,#CH154-67001
Complete trolley assembly - Includes upper and lower plates - For use with Scitex FB950 printers
|
|
0
CH154-67013
|
CH154-67013
#Hardware,#Parts,#CH154-67013
Light-blocking skirt - Used for the main cover - For use with Scitex FB950 printer
|
|
0
CH154-67034
|
CH154-67034
#Hardware,#Parts,#CH154-67034
Track assembly - For use with the Scitex FB950 printer
|
|
0
CH154-67043
|
CH154-67043
#Hardware,#Parts,#CH154-67043
ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer - When installing this part on some vintages, a power cable (included) must be replaced
|
|
0
CH971-62547
|
CH971-62547
#Hardware,#Parts,#CH971-62547
Luer fitting (White) - 1/8-inch, male-taper - Used on the ink tubing
|
|
0
CH971-62550
|
CH971-62550
#Hardware,#Parts,#CH971-62550
Luer fitting (White) - 3/32-inch, male-taper - Used on the ink tubing
|
|
0
CH971-90811
|
CH971-90811
#Hardware,#Parts,#CH971-90811
Carriage drive motor - For Scitex printers Scitex Color Span Carriage Drive Motor unit.
|
|
0
CH971-91414
|
CH971-91414
#Hardware,#Parts,#CH971-91414
Side alignment fence - Attached to belt assembly
|
|
0
CH971-91491
|
CH971-91491
#Hardware,#Parts,#CH971-91491
Manifold assembly - Includes six valves that mounts on the rear of the carriage above the trolley
|
|
0
CH971-91531
|
CH971-91531
#Hardware,#Parts,#CH971-91531
ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer
|
|
0
CH971-91544
|
CH971-91544
#Hardware,#Parts,#CH971-91544
Ink pump - Includes the tubing, fitting, and torx fasteners for installation
|
|
0
CH971-91598
|
CH971-91598
#Hardware,#Parts,#CH971-91598
ShopVac vacuum - 8-liter capacity - Compatible with all vintages of the Scitex FB950 printer
|
|
0
CH976-00148
|
CH976-00148
#Hardware,#Parts,#CH976-00148
Check valve assembly (White) - Used in the Off-Head Supply (OHS) - Color-coded for Light Cyan
|
|
0
CH976-00149
|
CH976-00149
#Hardware,#Parts,#CH976-00149
Check valve assembly (Black) - Used in the Off-Head Supply (OHS) - Color-coded for Black
|
|
0
CH976-00150
|
CH976-00150
#Hardware,#Parts,#CH976-00150
Check valve assembly (Red) - Used in the Off-Head Supply (OHS) - Color-coded for Magenta
|
|
0
CH976-00151
|
CH976-00151
#Hardware,#Parts,#CH976-00151
Check valve assembly (Green) - Used in the Off-Head Supply (OHS) - Color-coded for Light Magenta
|
|
0
CH976-00152
|
CH976-00152
#Hardware,#Parts,#CH976-00152
Check valve assembly (Blue) - Used in the Off-Head Supply (OHS) - Color-coded for Cyan
|
|
0
CH976-00153
|
CH976-00153
#Hardware,#Parts,#CH976-00153
Check valve assembly (Yellow) - Used in the Off-Head Supply (OHS) - Color-coded for Yellow
|
|
0
CJ860A
|
CJ860A
#Hardware,#Parts,#CJ860A
Cabling loom (conduit and cables) - Used between the electronics assembly and devices on the service end of the printer
|
|
0
CJ861A
|
CJ861A
#Hardware,#Parts,#CJ861A
Cabling loom (conduit and cables) - Used between the electronics assembly and devices on the user end of the printer (excluding devices in the user-end removable enclosure)
|
|
0
CJ862A
|
CJ862A
#Hardware,#Parts,#CJ862A
Cabling loom (conduit and cables) - Used between the electronics assembly and devices in the user-end removable enclosure
|
|
0
CQ114-67073
|
CQ114-67073
#Hardware,#Parts,#CQ114-67073
Float switch assembly - Includes brackets - Used in the service station - For the Scitex FB500/FB700/FB950 printer
|
|
Holder
|
|
0
CH154-60008
|
CH154-60008
#Holder,#Parts,#CH154-60008
Carriage restraint - Includes all components - Used for shipping
|
|
Housing
|
|
0
CQ115-67047
|
CQ115-67047
#Housing,#Parts,#CQ115-67047
Service-side lamp housing - Does not include bulb - For the Scitex FB700/FB950
|
|
0
CQ115-67048
|
CQ115-67048
#Housing,#Parts,#CQ115-67048
User-side lamp housing - Does not include bulb - For the Scitex FB700/FB950
|
|
Idler
|
|
0
CH971-91595
|
CH971-91595
#Idler,#Parts,#CH971-91595
Idler assembly - Located on service-end of the rail - For use with Scitex FB910/FB950 and the Designjet H-series
|
|
Kit
|
|
0
CH154-67016
|
CH154-67016
#Kit,#Supplies,#CH154-67016
Hardware kit - Includes the hose, spigot, and related hardware from service station basin to printer enclosure
|
|
0
CH154-67033
|
CH154-67033
#Kit,#Parts,#CH154-67033
Repacking kit - Materials to repack plotter - For use with Scitex FB950 printers
|
|
0
CH154-67042
|
CH154-67042
#Kit,#Supplies,#CH154-67042
Hardware kit - This is the one-time field modification kit to install a complete set of six air tube assemblies with ink-blocking filter onto the carriage - For use with the Scitex FB950 printer
|
|
0
CH154-67044
|
CH154-67044
#Kit,#Supplies,#CH154-67044
Hardware kit - Includes 12 clip assemblies and 12 taller luer caps - For use with the Designjet H-series and Scitex FB950
|
|
0
CH971-91602
|
CH971-91602
#Kit,#Supplies,#CH971-91602
Ink line and fittings kit - Includes 24-inch UV ink tubing and an assortment of color-coded luer fittings
|
|
Lamp
|
|
111129
CH154-67091
|
CH154-67091
#Lamp,#Parts,#CH154-67091
UV bulb/lamp - For use with Designjet H-Series and Scitex FB950/FB500/FB700 printers
|
|
Lubricant
|
|
0
CH109-67002
|
CH109-67002
#Lubricant,#Parts,#CH109-67002
Oil-saturated cloth - Used for lubricating the carriage rail - For use with Scitex FB500/700/FB950, and H-Series printers
|
|
Maintenance Kit
|
|
0
CH971-90854
|
CH971-90854
#Maintenance Kit,#Supplies,#CH971-90854
Grease kit - Used to lubricate gritroll bearings, media drive worm gear, and up/down threads of the media hold-down roller
|
|
Media
|
|
0
CH971-91089
|
CH971-91089
#Media,#Parts,#CH971-91089
Media spool collet - 3-inch in size - Can be hand tightened and loosened around the steel media spool
|
|
Motor
|
|
0
CH154-67008
|
CH154-67008
#Motor,#Parts,#CH154-67008
Media drive motor/reducer assembly - For the Scitex FB950/FB500/FB700 printer
|
|
0
CH971-91533
|
CH971-91533
#Motor,#Parts,#CH971-91533
Service station wiper motor - Moves the wiper head in the Y axis - For the Scitex FB500/FB700/FB950, also the Designjet H-Series
|
|
0
CH971-91561
|
CH971-91561
#Motor,#Parts,#CH971-91561
Takeup motor and switch assembly - Used for the roll-to-roll accessory - For the Scitex FB500/FB700/FB910/FB950
|
|
Mount
|
|
0
CH971-62834
|
CH971-62834
#Mount,#Parts,#CH971-62834
Flush panel mount - Recessed plastic hand-hold as used in the enclosures - For the Scitex FB910/FB950/FB500/FB700
|
|
Pad
|
|
0
CH971-91405
|
CH971-91405
#Pad,#Parts,#CH971-91405
Leveling pad - For Scitex FB500/FB700/FB950/FB910 printers
|
|
Pan
|
|
0
CH154-00004
|
CH154-00004
#Pan,#Parts,#CH154-00004
Light blocking pan - Located over the OHS area - For use with the Scitex FB950 printer
|
|
PC Board
|
|
0
CH154-67035
|
CH154-67035
#PC Board,#Parts,#CH154-67035
Motherboard assembly - For use with the Scitex FB950 printer
|
|
0
CH154-67041
|
CH154-67041
#PC Board,#Parts,#CH154-67041
Formatter - Software version 4.20 - For use with the Scitex FB950 printer
|
|
0
CH971-91389
|
CH971-91389
#PC Board,#Parts,#CH971-91389
Motor driver board (motor control board) - Located in the electronics assembly - For the Scitex FB500/FB700/FB91O/FB950 printers
|
|
0
CH971-91450
|
CH971-91450
#PC Board,#Parts,#CH971-91450
Power Distribution board - Regulates the 3-phase power going into the printer
|
|
0
CH971-91542
|
CH971-91542
#PC Board,#Parts,#CH971-91542
Main controller board - Used for the Off-Head Supply (OHS) - Has sockets for the profilers
|
|
0
CJ855A
|
CJ855A
#PC Board,#Parts,#CJ855A
I/O board - For use with the Scitex FB950 printer
|
|
Pin
|
|
0
CH971-91402
|
CH971-91402
#Pin,#Parts,#CH971-91402
Alignment pin assembly - These pins are used to set position of multiple sheets - For the Scitex FB500/FB700/FB950/FB910
|
|
Plate
|
|
0
CH154-67002
|
CH154-67002
#Plate,#Parts,#CH154-67002
Upper trolley plate assembly - For use with Scitex FB950 printers only
|
|
Power Cord
|
|
0
CH109-50001
|
CH109-50001
#Power Cord,#Parts,#CH109-50001
3-phase power cord - For use with plotters (Europe)
|
|
0
CH971-56213
|
CH971-56213
#Power Cord,#Parts,#CH971-56213
Main AC power cord - For use with Scitex FB910/FB950 printers
|
|
0
CQ114-67046
|
CQ114-67046
#Power Cord,#Parts,#CQ114-67046
Headboard power cord - Located in the track from the electronics assembly to the headboard - For use with the Scitex FB500/FB700/FB950
|
|
Power Supply
|
|
0
CH154-67011
|
CH154-67011
#Power Supply,#Parts,#CH154-67011
UV power supply - For one channel of the lamp system - For use with Scitex FB950 printers
|
|
0
CH971-60068
|
CH971-60068
#Power Supply,#Parts,#CH971-60068
Mini power supply (24VDC) - Powers the ink system vacuum pump only - For use with Scitex FB950 and Designjet H printers
|
|
0
CH971-90826
|
CH971-90826
#Power Supply,#Parts,#CH971-90826
ATX power supply - Output voltage 12VDC - Located in the main electronics box
|
|
0
CH971-91083
|
CH971-91083
#Power Supply,#Parts,#CH971-91083
Power supply and power plug adapter kit - Needed to implement the external auxiliary power source for IDS vacuum
|
|
0
CH971-91618
|
CH971-91618
#Power Supply,#Parts,#CH971-91618
Ionizer power supply - For replacement of the Simco-branded ionizer-bar power supply only
|
|
0
CJ854A
|
CJ854A
#Power Supply,#Parts,#CJ854A
Dual charge power supply - Output voltage 24/38VDC - For use with the Scitex FB950 printer
|
|
Pressure Assembly
|
|
0
CH104-67002
|
CH104-67002
#Pressure Assembly,#Parts,#CH104-67002
Vacuum/pressure assembly - Pressure pump for the Ink Delivery System (IDS) - Located on the OHS assembly
|
|
0
CH971-91543
|
CH971-91543
#Pressure Assembly,#Parts,#CH971-91543
Vacuum pressure assembly
|
|
Printhead
|
|
110052
CH971-91493
|
CH971-91493
#Printhead,#Parts,#CH971-91493
Master printhead - Does not include any thermistors - Used on any location of the printer - For use with Scitex FB950 and any model of the Designjet H series
|
|
Reader
|
|
110966
CH154-67006
|
CH154-67006
#Reader,#Parts,#CH154-67006
Encoder reader board - Does not include the metal bracket - This assembly is used on all of the lifting positions - For the Scitex FB950/FB500/FB700 printer
|
|
Receptacle
|
|
0
CH971-50021
|
CH971-50021
#Receptacle,#Parts,#CH971-50021
External AC-input receptacle (Blue) - Includes the cable from the receptacle to the AC filter
|
|
Regulator
|
|
0
CH971-91626
|
CH971-91626
#Regulator,#Parts,#CH971-91626
Regulator - Used in the Vacuum Pressure (VP) assembly
|
|
Relay
|
|
0
CH971-91586
|
CH971-91586
#Relay,#Parts,#CH971-91586
AC relay - Located in the main electronics box
|
|
Reservoir
|
|
0
CH104-67001
|
CH104-67001
#Reservoir,#Parts,#CH104-67001
Printhead reservoir kit - For use when there is a reservoir leak, fitting problem, or other printhead issues, where jetting is not the problem - For use with any of the piezo-printhead engines
|
|
0
CH971-57266
|
CH971-57266
#Reservoir,#Parts,#CH971-57266
Vacuum reservoir - This is a portion of the ink system vacuum - For use with Designjet H series and Scitex FB950 printers
|
|
Roller
|
|
0
CH154-20015
|
CH154-20015
#Roller,#Supplies,#CH154-20015
Media drive roller - Located on the output side of the engine - For use with the Scitex FB950 printer
|
|
0
CH154-20016
|
CH154-20016
#Roller,#Supplies,#CH154-20016
Media drive roller - Located on the output side of the engine - For use with the Scitex FB950 printer
|
|
0
CH971-57296
|
CH971-57296
#Roller,#Supplies,#CH971-57296
Foam-covered metal roller - Used in two places in the roll-feed supply system - For use with Scitex FB910/FB950 printers
|
|
0
CH971-57520
|
CH971-57520
#Roller,#Supplies,#CH971-57520
Media hold-down roller assembly - Located on both input or output sides - For use with the Scitex FB950 printer
|
|
0
CH971-91603
|
CH971-91603
#Roller,#Supplies,#CH971-91603
Bearing media roller
|
|
Sensor
|
|
110307
CH971-60085
|
CH971-60085
#Sensor,#Parts,#CH971-60085
Carriage home sensor - For use with Scitex FB950 printer
|
|
0
CH971-62685
|
CH971-62685
#Sensor,#Parts,#CH971-62685
Bracket height adjustment sensor - Mounting bracket for the alignment sensor that confirms that the media is straight before the pinch roller goes down
|
|
0
CH971-91028
|
CH971-91028
#Sensor,#Parts,#CH971-91028
Service station sensor - This is the home sensor for the wipers
|
|
0
CH971-91406
|
CH971-91406
#Sensor,#Parts,#CH971-91406
Media thickness sensor assembly - Calibrated in the factory - For the Scitex FB950/FB910/FB500/FB700 printer
|
|
0
CQ114-67023
|
CQ114-67023
#Sensor,#Parts,#CQ114-67023
Optical media-out detection sensor - Located on the input side of the printer - Two are used on the printer, one at center and one at the user end - For the Scitex FB500/FB700/FB950 printer
|
|
Service Station
|
|
0
CJ857A
|
CJ857A
#Service Station,#Parts,#CJ857A
Service station assembly - For use with the Scitex FB950 printer
|
|
Shaft
|
|
110382
CQ114-67110
|
CQ114-67110
#Shaft,#Parts,#CQ114-67110
Carriage drive shaft - Shaft is knurled to prevent pulley from slipping on the shaft - For the Scitex FB500/FB700/FB910/FB950 printer
|
|
Slider
|
|
0
CH154-67031
|
CH154-67031
#Slider,#Parts,#CH154-67031
Vertical slide - Located on the service station - If broken, this can be replaced alone without requiring replacement of the entire service station assembly
|
|
Spindle
|
|
0
CH971-91258
|
CH971-91258
#Spindle,#Parts,#CH971-91258
Media spool - Includes two 3-inch collets - For use with 98-inch printers
|
|
0
CH971-91558
|
CH971-91558
#Spindle,#Parts,#CH971-91558
Media spool - Does not inlcude collets - For use with 98-inch printers
|
|
Spring
|
|
0
CH971-63071
|
CH971-63071
#Spring,#Parts,#CH971-63071
Gas springs - Used to hold open the main cover on - For use with the Scitex FB950 printer
|
|
Support
|
|
0
CH971-56880
|
CH971-56880
#Support,#Parts,#CH971-56880
Media support table - For use with the Scitex FB910/FB950
|
|
Switch
|
|
0
CH154-67037
|
CH154-67037
#Switch,#Parts,#CH154-67037
Replacement foot switch - Orange safety hood not included - For the Scitex FB700/FB950/FB910 and H-Series
|
|
0
CH971-91444
|
CH971-91444
#Switch,#Parts,#CH971-91444
Switch - Configures the power distribution board for the type of 3-phase power used at the site - This switch must be set correctly before power is applied to the printer, or serious damage can occur to the printer
|
|
0
CH971-91469
|
CH971-91469
#Switch,#Parts,#CH971-91469
On/Off switch - Located on the electronics assembly - For the Scitex FB500/FB700/FB950/FB910 printers
|
|
0
CH971-91576
|
CH971-91576
#Switch,#Parts,#CH971-91576
Door switch - Used ont the cover-open detect - For use with Designjet H-series printers
|
|
0
CQ115-67002
|
CQ115-67002
#Switch,#Parts,#CQ115-67002
Frm Foot Switch U
|
|
Tape
|
|
0
CQ115-67051
|
CQ115-67051
#Tape,#Parts,#CQ115-67051
Foam tape - 175cm (69-inch) long - Located on top of the rail that cushions the track assembly (Igus) - This length is for any 2.5m (98-inch) printer, but may be cut down to shorter lengths for use on other machines
|
|
Tensioner
|
|
0
CH971-91562
|
CH971-91562
#Tensioner,#Parts,#CH971-91562
Supply tensioner - Used on the user-input bracket, for use with the supply and take-up system - For use with Scitex FB910/FB950 printers
|
|
Thermistor
|
|
0
CH971-91492
|
CH971-91492
#Thermistor,#Parts,#CH971-91492
Thermistors kit - Includes two ink and one air temperature thermistor (they have been calibrated together and should be replaced together)
|
|
Tool
|
|
0
CH971-55984
|
CH971-55984
#Tool,#Parts,#CH971-55984
Head height gauge tool - This go/no-go gauge is used to set the printhead height to 0.085-inches above the surface of the media
|
|
0
CH971-57693
|
CH971-57693
#Tool,#Parts,#CH971-57693
Custom tool - Assists removing and installing the main drive belt connection to the carriage
|
|
0
CH971-91572
|
CH971-91572
#Tool,#Parts,#CH971-91572
Belt tension tool kit - Fixture used to measure tension on the media belt - Requires a dial indicator (not included) - For the Scitex FB500/FB700/FB950/FB910
|
|
0
CH971-91631
|
CH971-91631
#Tool,#Parts,#CH971-91631
Service tools kit - Kit includes the head height gauge, squeeze bottle (for flush), lint-free cloths, luer caps, and the carriage belt - For use with Scitex FB950 and the Designjet H-series
|
|
Transformer
|
|
0
CH971-15183
|
CH971-15183
#Transformer,#Parts,#CH971-15183
Step-down transformer (220VAC to 110VAC) - Used with the 110VAC ShopVac
|
|
Tray
|
|
0
CJ858A
|
CJ858A
#Tray,#Parts,#CJ858A
Vacuum fan tray - Includes the fans - Used for the pre-print (center) zone of the vacuum table - For use with the Scitex FB950 printer
|
|
0
CJ859A
|
CJ859A
#Tray,#Parts,#CJ859A
Input/output vacuum fan tray - Includes the fans - Used for both the input and output zones of the vacuum table - For use with the Scitex FB950 printer
|
|
Tube
|
|
0
CH154-67004
|
CH154-67004
#Tube,#Parts,#CH154-67004
U-tube assembly - For air connection between any two UV printheads
|
|
0
CH154-67017
|
CH154-67017
#Tube,#Supplies,#CH154-67017
Long opaque tube (White) - For ink that runs through the track assembly - Luer fittings are color-coded for the light cyan ink channel
|
|
0
CH154-67018
|
CH154-67018
#Tube,#Supplies,#CH154-67018
Long opaque tube (Black) - For ink that runs through the track assembly - Luer fittings color-coded for the black ink channel
|
|
0
CH154-67019
|
CH154-67019
#Tube,#Parts,#CH154-67019
Long opaque tube (Red) - For ink that runs through the track assembly - Luer fittings are color-coded for the magenta ink channel
|
|
0
CH154-67020
|
CH154-67020
#Tube,#Parts,#CH154-67020
Long opaque tube (Green) - For ink that runs through the track assembly - Luer fittings are color-coded for the light magenta ink channel
|
|
0
CH154-67021
|
CH154-67021
#Tube,#Supplies,#CH154-67021
Long opaque tube (Blue) - For ink that runs through the track assembly - Luer fittings are color-coded for the cyan ink channel
|
|
0
CH154-67022
|
CH154-67022
#Tube,#Supplies,#CH154-67022
Long opaque tube (Yellow) - For ink that runs through the track assembly - Luer fittings are color-coded for the yellow ink channel
|
|
0
CH154-67023
|
CH154-67023
#Tube,#Parts,#CH154-67023
Ink system vacuum tube - Runs through the track assembly - For use with Scitex FB500/FB700/FB950 printers
|
|
0
CH154-67024
|
CH154-67024
#Tube,#Parts,#CH154-67024
Ink system pressure tube - Runs through the track assembly - For use with FB500/FB700/FB950
|
|
0
CH971-91227
|
CH971-91227
#Tube,#Parts,#CH971-91227
U-tube - For use with ink between two printheads of a color
|
|
0
CH971-91499
|
CH971-91499
#Tube,#Parts,#CH971-91499
Short UV ink tube - Connects to the printhead with a luer fitting and to the ink track tube with multi-colored luer fittings
|
|
0
CQ114-67221
|
CQ114-67221
#Tube,#Parts,#CQ114-67221
Bucket tube - 10.90-inches (27.68 cm) length hose - Includes hose clamps for attachment - Located in the service station basin (bucket) between the wiper and the baffle - For use with Scitex FB500/FB700/FB950 printers
|
|
Vacuum
|
|
0
CH971-91344
|
CH971-91344
#Vacuum,#Parts,#CH971-91344
Restrictor - For use with all vacuum/pressure assemblies
|
|
Wiper
|
|
109884
CH154-67030
|
CH154-67030
#Wiper,#Parts,#CH154-67030
Wiper blade - For use with the Scitex FB950 printer - This is a different material than the H-Series wiper
|