Filter Parts:
search:
|
Adjuster
|
43551
RM1-1318-000CN
|
RM1-1318-000CN
View Parts Diagram/s
#Adjuster,#Parts,#RM1-1318-000CN
Duplexer paper size adjuster assembly - Includes the adjustment lever, holder bracket, and the two drive gears in a spring loaded arm - Mounts on the top right side of the duplexer assembly
|
|
Arm
|
|
33737
RC1-3544-020CN
|
RC1-3544-020CN
View Parts Diagram/s
#Arm,#Parts,#RC1-3544-020CN
Cam Arm - Dogleg shaped arm - Disengages the toner cartridge drive gear when the toner cartridge access door is opened - Mounts between the access door and the main drive gear assembly
|
|
33745
RC1-3551-000CN
|
RC1-3551-000CN
View Parts Diagram/s
#Arm,#Parts,#RC1-3551-000CN
Tag arm - Spring loaded arm that holds the memory contact and cable (contacts the memory in the toner cartridge) - Mounts in the tag arm holder (Towards the right end of the laser/scanner support shelf)
|
|
Body
|
43482
RM1-1294-000CN
|
RM1-1294-000CN
View Parts Diagram/s
#Body,#Parts,#RM1-1294-000CN
250-sheet (tray 2) body assembly - Includes everything except for the tray front cover assembly (RM1-1293-030CN).
|
|
Bushing
|
|
30633
RB2-2895-000CN
|
RB2-2895-000CN
View Parts Diagram/s
#Bushing,#Parts,#RB2-2895-000CN
Shaft bushing/retainer - Right side pickup roller support bushing
|
|
33749
RC1-3665-000CN
|
RC1-3665-000CN
View Parts Diagram/s
#Bushing,#Parts,#RC1-3665-000CN
Bushing/shaft retainer (Plastic) - Small plastic cylinder with four nubs that twist - Locks into the side frame
|
|
Control Panel
|
|
43542
RM1-1311-000CN
|
RM1-1311-000CN
View Parts Diagram/s
#Control Panel,#Parts,#RM1-1311-000CN
Control panel assembly - Includes the control panel bezel, 'Go' and 'Cancel' buttons, LED light pipe, and sheild plate (PC board NOT included) - Mounts on the right side of the top cover
|
|
Cover
|
|
33782
RC1-3801-000CN
|
RC1-3801-000CN
View Parts Diagram/s
#Cover,#Parts,#RC1-3801-000CN
Top cover assembly - Has face-down paper output tray molded into it
|
|
33783
RC1-3812-000CN
|
RC1-3812-000CN
View Parts Diagram/s
#Cover,#Parts,#RC1-3812-000CN
Left side printer cover - Has moled-in bezel for the interface port connectors (On the formatter board)
|
|
33785
RC1-3814-000CN
|
RC1-3814-000CN
View Parts Diagram/s
#Cover,#Parts,#RC1-3814-000CN
Right side cover assembly - Has molded-in air intake louvers
|
|
43567
RM1-1323-030CN
|
RM1-1323-030CN
View Parts Diagram/s
#Cover,#Parts,#RM1-1323-030CN
Tray front cover assembly - Mounts to the front of tray 2
|
|
43570
RM1-1324-080CN
|
RM1-1324-080CN
View Parts Diagram/s
#Cover,#Parts,#RM1-1324-080CN
Front cover set - Includes the toner cartridge access door, single sheet priority input slot door, front cover (between tray 2 and the priority input slot), and the noise absorber
|
|
43572
RM1-1325-000CN
|
RM1-1325-000CN
View Parts Diagram/s
#Cover,#Parts,#RM1-1325-000CN
Rear cover assembly - Includes the rear cover bezel and fold down face-up (or straight through) paper output tray (Tray is NOT sold separately)
|
|
Feeder
|
|
43441
RM1-1286-000CN
|
RM1-1286-000CN
View Parts Diagram/s
#Feeder,#Parts,#RM1-1286-000CN
Paper feed guide assembly - Support structure to guide the paper into the fusing assembly - Ribbed plastic frame with metal guide plate
|
|
Flag
|
|
33719
RC1-3472-000CN
|
RC1-3472-000CN
View Parts Diagram/s
#Flag,#Parts,#RC1-3472-000CN
Paper sensor flag - cylindrical plastic piece with a flag on each end (One senses the paper, the other activates the photo-sensor)
|
|
Fuser Assembly
|
|
102690
RM1-1289-080CN
|
RM1-1289-080CN
View Parts Diagram/s
#Fuser Assembly,#Supplies,#RM1-1289-080CN
Fusing assembly - Bonds toner to paper with heat - For 110V to 127VAC operation
|
|
44444
RM1-2337-000CN
|
RM1-2337-000CN
View Parts Diagram/s
#Fuser Assembly,#Supplies,#RM1-2337-000CN
Fusing assembly - Bonds toner to paper with heat - For 220V to 240VAC operation
|
|
Gear
|
|
47319
RU5-0332-000CN
|
RU5-0332-000CN
View Parts Diagram/s
#Gear,#Parts,#RU5-0332-000CN
19-tooth gear (White plastic)
|
|
Gear Assembly
|
|
43495
RM1-1299-020CN
|
RM1-1299-020CN
View Parts Diagram/s
#Gear Assembly,#Parts,#RM1-1299-020CN
Main drive gear assembly - Large plate with ten drive gears and the single sheet priority drive clutch (SL2) - Mounts on the right side plate assembly
|
|
43506
RM1-1301-000CN
|
RM1-1301-000CN
View Parts Diagram/s
#Gear Assembly,#Parts,#RM1-1301-000CN
Double gear assembly - Includes the gear body, inset gear (both with a toothless area) and compression spring - For driving the paper pickup roller
|
|
43517
RM1-1303-000CN
|
RM1-1303-000CN
View Parts Diagram/s
#Gear Assembly,#Parts,#RM1-1303-000CN
Normal rotation gear assembly - Includes the internal/external geared body, two planetary gears, outer gear with shaft, and the black ratchet gear
|
|
43521
RM1-1304-000CN
|
RM1-1304-000CN
View Parts Diagram/s
#Gear Assembly,#Parts,#RM1-1304-000CN
Reverse rotation gear assembly - Includes the internal/external geared body, two planetary gears, outter gear with shaft, and the White ratchet gear
|
|
43524
RM1-1305-000CN
|
RM1-1305-000CN
View Parts Diagram/s
#Gear Assembly,#Parts,#RM1-1305-000CN
Top output gear assembly - Includes three white plastic gears mounted on a support bracket - Drives the top output bin roller
|
|
Holder
|
|
33728
RC1-3537-000CN
|
RC1-3537-000CN
View Parts Diagram/s
#Holder,#Parts,#RC1-3537-000CN
Fan Holder assembly - Plastic fan bezel with airflow ports - Directs airflow to the various parts of the printer - Mounts on the right side plate assembly
|
|
33730
RC1-3537-020CN
|
RC1-3537-020CN
View Parts Diagram/s
#Holder,#Parts,#RC1-3537-020CN
Fan Holder assembly - Plastic fan bezel with airflow ports - Directs airflow to the various parts of the printer - Mounts on the right side plate assembly
|
|
33764
RC1-3728-000CN
|
RC1-3728-000CN
View Parts Diagram/s
#Holder,#Parts,#RC1-3728-000CN
Drawer holder - Right side Tray 2 holder - Also Tray 2 connector mount housing
|
|
Interlock
|
|
43647
RM1-1467-000CN
|
RM1-1467-000CN
View Parts Diagram/s
#Interlock,#Parts,#RM1-1467-000CN
Interlock switch assembly - Disables the printer when the left side cover is removed - Mounts in the upper front corner of the left side plate assembly
|
|
43648
RM1-1467-020CN
|
RM1-1467-020CN
View Parts Diagram/s
#Interlock,#Parts,#RM1-1467-020CN
Interlock switch assembly - Disables the printer when the left side cover is removed - Mounts in the upper front corner of the left side plate assembly
|
|
43649
RM1-1467-030CN
|
RM1-1467-030CN
View Parts Diagram/s
#Interlock,#Parts,#RM1-1467-030CN
Interlock switch assembly - Disables the printer when the left side cover is removed - Mounts in the upper front corner of the left side plate assembly
|
|
Laser Scanner
|
|
43655
RM1-1470-030CN
|
RM1-1470-030CN
View Parts Diagram/s
#Laser Scanner,#Parts,#RM1-1470-030CN
Laser/scanner assembly - Mounts on the laser/scanner support shelf
|
|
43659
RM1-1470-050CN
|
RM1-1470-050CN
View Parts Diagram/s
#Laser Scanner,#Parts,#RM1-1470-050CN
Laser/scanner assembly - Mounts on the laser/scanner support shelf
|
|
Link
|
|
43646
RM1-1464-000CN
|
RM1-1464-000CN
View Parts Diagram/s
#Link,#Parts,#RM1-1464-000CN
Shutter link assembly - Spring loaded link which engages the shutter on the laser/scanner assembly (blocking the laser beam) when the toner cartridge access door is opened - Mounts on the left front of the laser/scanner support shelf
|
|
Mono Laser
|
|
27881
Q5933A
|
Q5933A
#Mono Laser,#Printers,#Q5933A
HP LaserJet 1160 Printer
|
|
Motor
|
|
41494
RK2-0418-000CN
|
RK2-0418-000CN
View Parts Diagram/s
#Motor,#Parts,#RK2-0418-000CN
DC stepper motor assembly - Drives all rollers and Fuser Assembly via the main drive gear assembly - Mounts on the inside rear of the right side plate assembly
|
|
41498
RK2-0419-000CN
|
RK2-0419-000CN
View Parts Diagram/s
#Motor,#Parts,#RK2-0419-000CN
DC stepper motor assembly - Drives all rollers and fusing assembly via the main drive gear assembly - Mounts on the inside rear of the right side plate assembly
|
|
NamePlate
|
0
Q5933-40001
|
Q5933-40001
#NamePlate,#Parts,#Q5933-40001
Nameplate-LJ 1160
|
|
PC Board
|
|
0
CB358-67901
|
CB358-67901
#PC Board,#Parts,#CB358-67901
Formatter board assembly - Contains the logic, and the parallel and USB interface circuitry and connectors - Mounts towards the rear on the left side plate assembly
|
|
43408
RM1-1242-030CN
|
RM1-1242-030CN
View Parts Diagram/s
#PC Board,#Parts,#RM1-1242-030CN
Engine control unit (ECU) PC board - Control and power supply board for the printer (For 110V to 127V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer
|
|
43417
RM1-1243-030CN
|
RM1-1243-030CN
View Parts Diagram/s
#PC Board,#Parts,#RM1-1243-030CN
Engine controlunit (ECU) PC board - Control and power supply board for the printer (For 220V to 240V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer
|
|
43576
RM1-1327-030CN
|
RM1-1327-030CN
View Parts Diagram/s
#PC Board,#Parts,#RM1-1327-030CN
Engine control unit (ECU) PC board assembly - Includes the PC board, bottom pan, standoffs, and gear cover (For 110V to 127V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer
|
|
43644
RM1-1463-030CN
|
RM1-1463-030CN
View Parts Diagram/s
#PC Board,#Parts,#RM1-1463-030CN
Engine control unit (ECU) PC board assembly - Includes the PC board, bottom pan, standoffs, and gear cover (For 220V to 240V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer
|
|
Plate
|
|
0
RC1-3623-000CN
|
RC1-3623-000CN
#Plate,#Parts,#RC1-3623-000CN
Plate pressure right
|
|
0
RC1-3624-000CN
|
RC1-3624-000CN
#Plate,#Parts,#RC1-3624-000CN
Plate pressure left
|
|
Power Cord
|
|
110272
8121-0964
|
8121-0964
#Power Cord,#Parts,#8121-0964
Power cord (Black) - 16 AWG (1.25 sq.mm.), 1.9m (6.2ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, and Thailand)
|
|
Retainer
|
|
0
RA0-1189-000CN
|
RA0-1189-000CN
#Retainer,#Parts,#RA0-1189-000CN
Retainer spring
|
|
43529
RM1-1306-000CN
|
RM1-1306-000CN
View Parts Diagram/s
#Retainer,#Parts,#RM1-1306-000CN
Paper retainer assembly - Bracket assembly with two flapper levers - Keeps paper in the top output bin from sliding back into the printer
|
|
44459
RM1-2340-000CN
|
RM1-2340-000CN
View Parts Diagram/s
#Retainer,#Parts,#RM1-2340-000CN
Paper retainer assembly - Bracket assembly with two flapper levers - Keeps paper in the top output bin from sliding back into the printer
|
|
Roller
|
|
0
RC1-3468-000CN
|
RC1-3468-000CN
#Roller,#Parts,#RC1-3468-000CN
Roller Paper Pick-Up
|
|
33703
RC1-3470-000CN
|
RC1-3470-000CN
View Parts Diagram/s
#Roller,#Supplies,#RC1-3470-000CN
Idler roller (plastic) - Free wheeling roller - Two used
|
|
0
RC1-3629-000CN
|
RC1-3629-000CN
#Roller,#Parts,#RC1-3629-000CN
Roller pressure
|
|
41919
RL1-0527-000CN
|
RL1-0527-000CN
View Parts Diagram/s
#Roller,#Supplies,#RL1-0527-000CN
Top output bin delivery roller assembly - Plastic rod with four rubber wheels (two narrow and two wide)
|
|
41927
RL1-0540-000CN
|
RL1-0540-000CN
View Parts Diagram/s
#Roller,#Supplies,#RL1-0540-000CN
Paper pickup roller - Includes the D shaped pickup roller spindle with the rubber tire - Does NOT include (RC1-3470-000CN) the idler rollers on each side of the pickup roller
|
|
43427
RM1-1281-070CN
|
RM1-1281-070CN
View Parts Diagram/s
#Roller,#Supplies,#RM1-1281-070CN
Registration roller assembly - Includes the frame, the two roller assemblies, and the upper transfer guide - Mounts in the front middle of the print engine assembly
|
|
43665
RM1-1471-000CN
|
RM1-1471-000CN
View Parts Diagram/s
#Roller,#Supplies,#RM1-1471-000CN
Transfer roller assembly - Transfers static charge to the media being printed on - Mounts in front of the paper feed guide assembly
|
|
102702
RM1-2339-000CN
|
RM1-2339-000CN
View Parts Diagram/s
#Roller,#Supplies,#RM1-2339-000CN
Registration roller assembly - Includes the frame, the two roller assemblies, and the upper transfer guide - Mounts in the front middle of the print engine assembly
|
|
Screw
|
|
49656
XA9-1420-000CN
|
XA9-1420-000CN
View Parts Diagram/s
#Screw,#Parts,#XA9-1420-000CN
M3 pan head phillips screw with captive flat and split-lock washers - 8mm long
|
|
49835
XA9-1495-000CN
|
XA9-1495-000CN
View Parts Diagram/s
#Screw,#Parts,#XA9-1495-000CN
4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
|
|
104125
XA9-1503-000CN
|
XA9-1503-000CN
View Parts Diagram/s
#Screw,#Parts,#XA9-1503-000CN
M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
|
|
50402
XA9-1504-000CN
|
XA9-1504-000CN
View Parts Diagram/s
#Screw,#Parts,#XA9-1504-000CN
M3 truss head (flanged) screw - 8mm long
|
|
50706
XB4-7300-809CN
|
XB4-7300-809CN
View Parts Diagram/s
#Screw,#Parts,#XB4-7300-809CN
M3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long
|
|
50715
XB4-7400-805CN
|
XB4-7400-805CN
View Parts Diagram/s
#Screw,#Parts,#XB4-7400-805CN
Screw- tapping- truss m4 screw- tapping- truss m4x8
|
|
Sensor
|
|
43434
RM1-1283-000CN
|
RM1-1283-000CN
View Parts Diagram/s
#Sensor,#Parts,#RM1-1283-000CN
Top sensor assembly - Includes the bracket and flags for the top of page detection sensor (PS912), and paper width detection sensor (PS913) - Mounts behind the registration roller assembly
|
|
Service Parts
|
|
0
Q5933-69056
|
Q5933-69056
#Service Parts,#Parts,#Q5933-69056
Rstrd Q5933-67056
|
|
0
Q5933-69057
|
Q5933-69057
#Service Parts,#Parts,#Q5933-69057
Rstrd q5933-67957
|
|
0
Q5933A#AKV
|
Q5933A#AKV
#Service Parts,#Parts,#Q5933A#AKV
HP LaserJet 1160 - S. Am HP LaserJet 1160 - S. Amer.
|
|
Shaft
|
|
33716
RC1-3471-000CN
|
RC1-3471-000CN
View Parts Diagram/s
#Shaft,#Parts,#RC1-3471-000CN
Drive shaft - Drives pickup roller
|
|
Solenoid
|
|
41504
RK2-0424-000CN
|
RK2-0424-000CN
View Parts Diagram/s
#Solenoid,#Parts,#RK2-0424-000CN
24V DC Solenoid (SL1) - Engages the pickup roller gear/clutch assembly for tray 2 (250-sheet tray) - Mounts on the right side plate assembly
|
|
Spring
|
|
104117
RU5-2323-000CN
|
RU5-2323-000CN
View Parts Diagram/s
#Spring,#Parts,#RU5-2323-000CN
Compression spring
|
|
47441
RU5-2335-000CN
|
RU5-2335-000CN
View Parts Diagram/s
#Spring,#Parts,#RU5-2335-000CN
Compression spring - Applies downward pressure on the memory tag arm to contact the toner cartridge
|
|
Tray Assembly
|
|
43564
RM1-1322-080CN
|
RM1-1322-080CN
View Parts Diagram/s
#Tray Assembly,#Parts,#RM1-1322-080CN
250-sheet input paper tray (tray 2) assembly - Includes the tray body and front cover assemblies
|
|
Unit
|
|
0
Q5933-69055
|
Q5933-69055
#Unit,#Parts,#Q5933-69055
RSTRD Q5933A #405 220v Exchange Printer Unit-LJ
|
|
0
Q5933A-ROHS
|
Q5933A-ROHS
#Unit,#Parts,#Q5933A-ROHS
Lj1160 Svc Replmt Unit 1
|