Filter Parts:
search:
Airflow Guide
|
32077
RB2-9904-000CN
|
RB2-9904-000CN
View Parts Diagram/s
#Airflow Guide,#Parts,#RB2-9904-000CN
Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side
|
32197
RB3-0025-000CN
|
RB3-0025-000CN
View Parts Diagram/s
#Airflow Guide,#Parts,#RB3-0025-000CN
Airflow guide (duct) / fan holder bracket assembly (Quartz Gray plastic)
|
Arm
|
32324
RB3-0089-030CN
|
RB3-0089-030CN
View Parts Diagram/s
#Arm,#Parts,#RB3-0089-030CN
Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
|
Belt
|
30136
RB1-8668-000CN
|
RB1-8668-000CN
#Belt,#Parts,#RB1-8668-000CN
Feed Guide Drive Belt
|
102640
RB1-8668-030CN
|
RB1-8668-030CN
View Parts Diagram/s
#Belt,#Parts,#RB1-8668-030CN
Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
|
32281
RB3-0063-000CN
|
RB3-0063-000CN
View Parts Diagram/s
#Belt,#Parts,#RB3-0063-000CN
Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
|
Bezel
|
32210
RB3-0035-000CN
|
RB3-0035-000CN
View Parts Diagram/s
#Bezel,#Parts,#RB3-0035-000CN
Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors
|
Bushing
|
30714
RB2-2973-000CN
|
RB2-2973-000CN
View Parts Diagram/s
#Bushing,#Parts,#RB2-2973-000CN
Support bushing
|
30792
RB2-3043-000CN
|
RB2-3043-000CN
View Parts Diagram/s
#Bushing,#Parts,#RB2-3043-000CN
Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
|
30798
RB2-3044-000CN
|
RB2-3044-000CN
View Parts Diagram/s
#Bushing,#Parts,#RB2-3044-000CN
Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
|
32058
RB2-9808-000CN
|
RB2-9808-000CN
View Parts Diagram/s
#Bushing,#Parts,#RB2-9808-000CN
Bushing/shaft retainer assembly - Black plastic
|
32061
RB2-9809-000CN
|
RB2-9809-000CN
View Parts Diagram/s
#Bushing,#Parts,#RB2-9809-000CN
Bushing/shaft retainer assembly (White plastic)
|
32173
RB3-0014-000CN
|
RB3-0014-000CN
View Parts Diagram/s
#Bushing,#Parts,#RB3-0014-000CN
Bushing assembly (black plastic bushing with small guide roller on top)
|
46777
RS5-1635-000CN
|
RS5-1635-000CN
View Parts Diagram/s
#Bushing,#Parts,#RS5-1635-000CN
Shaft bushing for HP Color LaserJet 1500 Series
|
46784
RS5-1637-000CN
|
RS5-1637-000CN
View Parts Diagram/s
#Bushing,#Parts,#RS5-1637-000CN
Bushing (black plastic)
|
46788
RS5-1638-000CN
|
RS5-1638-000CN
View Parts Diagram/s
#Bushing,#Parts,#RS5-1638-000CN
Bushing for HP Color LaserJet 1500 Series
|
Cable
|
7793
5063-1256
|
5063-1256
View Parts Diagram/s
#Cable,#Parts,#5063-1256
IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
|
7800
5063-1257
|
5063-1257
View Parts Diagram/s
#Cable,#Parts,#5063-1257
IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
|
108528
C2951A
|
C2951A
View Parts Diagram/s
#Cable,#Parts,#C2951A
IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
|
21480
C9706-60104
|
C9706-60104
View Parts Diagram/s
#Cable,#Parts,#C9706-60104
Flat flexible cable
|
39964
RG5-6974-000CN
|
RG5-6974-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-6974-000CN
Cable assembly for HP Color LaserJet 1500 Series
|
39983
RG5-7106-000CN
|
RG5-7106-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7106-000CN
Cable assembly (two 2-pin connectors)
|
39987
RG5-7107-000CN
|
RG5-7107-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7107-000CN
Cable assembly (8-pin, red wire)
|
39989
RG5-7108-000CN
|
RG5-7108-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7108-000CN
Cable assembly (two 8-pin connectors, Purple wire)
|
39993
RG5-7109-000CN
|
RG5-7109-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7109-000CN
Cable assembly (two 7-pin connectors)
|
40001
RG5-7114-020CN
|
RG5-7114-020CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7114-020CN
Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board
|
40005
RG5-7115-000CN
|
RG5-7115-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7115-000CN
Cable assembly (two 3-pin connectors)
|
40009
RG5-7117-000CN
|
RG5-7117-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7117-000CN
Cable assembly (two 3-pin connectors)
|
40013
RG5-7122-000CN
|
RG5-7122-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7122-000CN
Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector
|
40017
RG5-7123-000CN
|
RG5-7123-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7123-000CN
Grounding cable assembly
|
40029
RG5-7126-000CN
|
RG5-7126-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7126-000CN
Cable assembly (two 5-pin connectors)
|
40033
RG5-7128-000CN
|
RG5-7128-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7128-000CN
Cable assembly (four 3-pin connectors)
|
40037
RG5-7129-000CN
|
RG5-7129-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7129-000CN
Cable assembly (two connectors and two spade lugs)
|
40041
RG5-7130-000CN
|
RG5-7130-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7130-000CN
High voltage cable assembly
|
40063
RG5-7144-000CN
|
RG5-7144-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7144-000CN
Cable assembly (with seven connectors)
|
40065
RG5-7145-000CN
|
RG5-7145-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7145-000CN
Front cable assembly (six connectors)
|
40069
RG5-7146-000CN
|
RG5-7146-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7146-000CN
High voltage cable assembly (two 15-pin connectors and two 14-pin connectors)
|
40081
RG5-7161-000CN
|
RG5-7161-000CN
View Parts Diagram/s
#Cable,#Parts,#RG5-7161-000CN
Cable assembly (two 3-pin connectors and a spad lug)
|
40652
RH2-5524-000CN
|
RH2-5524-000CN
View Parts Diagram/s
#Cable,#Parts,#RH2-5524-000CN
Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
|
Carousel
|
39822
RG5-6910-080CN
|
RG5-6910-080CN
View Parts Diagram/s
#Carousel,#Parts,#RG5-6910-080CN
Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables
|
Cleaner
|
102730
5090-3379
|
5090-3379
#Cleaner,#Parts,#5090-3379
Toner cleaning cloth - Specially treated cloth for absorbing toner or Ink (1 per package) - Ideal for cleaning up toner spills and Ink for your plotter / copier / printer
|
Clip
|
48851
WT2-5056-000CN
|
WT2-5056-000CN
View Parts Diagram/s
#Clip,#Parts,#WT2-5056-000CN
Cable clip - `C` shaped White plastic
|
50890
XD2-1100-502CN
|
XD2-1100-502CN
View Parts Diagram/s
#Clip,#Parts,#XD2-1100-502CN
E-ring clip for HP Color LaserJet 1500 Series
|
Clutch
|
41306
RH7-5389-000CN
|
RH7-5389-000CN
View Parts Diagram/s
#Clutch,#Parts,#RH7-5389-000CN
Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
|
Connector
|
40650
RH2-5520-000CN
|
RH2-5520-000CN
View Parts Diagram/s
#Connector,#Parts,#RH2-5520-000CN
Connector for the fusing assembly - Seven small contol pins plus three separated high current pins
|
48830
WS1-6336-000CN
|
WS1-6336-000CN
View Parts Diagram/s
#Connector,#Parts,#WS1-6336-000CN
Connector assembly - For optional bottom paper tray
|
Control Panel
|
39840
RG5-6927-000CN
|
RG5-6927-000CN
View Parts Diagram/s
#Control Panel,#Parts,#RG5-6927-000CN
Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board
|
Cover
|
32102
RB2-9916-020CN
|
RB2-9916-020CN
View Parts Diagram/s
#Cover,#Parts,#RB2-9916-020CN
Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
|
32200
RB3-0028-000CN
|
RB3-0028-000CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0028-000CN
Left side cover (Quartz Gray) - Does not include any attaching parts
|
32202
RB3-0030-000CN
|
RB3-0030-000CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0030-000CN
Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door
|
32205
RB3-0032-000CN
|
RB3-0032-000CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0032-000CN
Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer
|
32246
RB3-0052-000CN
|
RB3-0052-000CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0052-000CN
Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
|
32343
RB3-0102-000CN
|
RB3-0102-000CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0102-000CN
Front inner cover (Blue) - Mounts on the front frame above the multi-purpose input tray
|
32345
RB3-0103-000CN
|
RB3-0103-000CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0103-000CN
Front lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logo
|
32347
RB3-0104-000CN
|
RB3-0104-000CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0104-000CN
Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
|
32378
RB3-0120-020CN
|
RB3-0120-020CN
View Parts Diagram/s
#Cover,#Parts,#RB3-0120-020CN
Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
|
39806
RG5-6900-000CN
|
RG5-6900-000CN
View Parts Diagram/s
#Cover,#Parts,#RG5-6900-000CN
Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly
|
39808
RG5-6902-000CN
|
RG5-6902-000CN
View Parts Diagram/s
#Cover,#Parts,#RG5-6902-000CN
Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)
|
39920
RG5-6953-000CN
|
RG5-6953-000CN
View Parts Diagram/s
#Cover,#Parts,#RG5-6953-000CN
Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door
|
Damper
|
31406
RB2-6248-000CN
|
RB2-6248-000CN
View Parts Diagram/s
#Damper,#Parts,#RB2-6248-000CN
Damper assembly (Gray plastic piece with small 13-tooth gear on it)
|
Door
|
32208
RB3-0033-000CN
|
RB3-0033-000CN
View Parts Diagram/s
#Door,#Parts,#RB3-0033-000CN
Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover
|
36540
RF5-4007-000CN
|
RF5-4007-000CN
View Parts Diagram/s
#Door,#Parts,#RF5-4007-000CN
Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frame
|
Drive Assembly
|
109506
RG5-6911-000CN
|
RG5-6911-000CN
View Parts Diagram/s
#Drive Assembly,#Parts,#RG5-6911-000CN
Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears
|
Drum
|
21471
C9704-67901
|
C9704-67901
View Parts Diagram/s
#Drum,#Supplies,#C9704-67901
Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
|
Fan
|
41090
RH7-1630-000CN
|
RH7-1630-000CN
View Parts Diagram/s
#Fan,#Parts,#RH7-1630-000CN
Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
|
Flag
|
32111
RB2-9925-000CN
|
RB2-9925-000CN
View Parts Diagram/s
#Flag,#Parts,#RB2-9925-000CN
Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
|
32368
RB3-0111-000CN
|
RB3-0111-000CN
View Parts Diagram/s
#Flag,#Parts,#RB3-0111-000CN
Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
|
32403
RB3-0135-000CN
|
RB3-0135-000CN
View Parts Diagram/s
#Flag,#Parts,#RB3-0135-000CN
Test print flag (Black lever)
|
Foot
|
103720
RB2-6297-000CN
|
RB2-6297-000CN
View Parts Diagram/s
#Foot,#Parts,#RB2-6297-000CN
Rubber foot - Square self-adhesive rubber foot
|
Fuser Assembly
|
39810
RG5-6903-000CN
|
RG5-6903-000CN
View Parts Diagram/s
#Fuser Assembly,#Supplies,#RG5-6903-000CN
Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat
|
45483
RM1-3525-000CN
|
RM1-3525-000CN
View Parts Diagram/s
#Fuser Assembly,#Supplies,#RM1-3525-000CN
Fusing assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer
|
Gear
|
103730
RB3-0022-000CN
|
RB3-0022-000CN
View Parts Diagram/s
#Gear,#Parts,#RB3-0022-000CN
22 tooth gear (Black plastic) - Small gear with diagonally cut teeth
|
32333
RB3-0091-000CN
|
RB3-0091-000CN
View Parts Diagram/s
#Gear,#Parts,#RB3-0091-000CN
16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab
|
32338
RB3-0092-000CN
|
RB3-0092-000CN
View Parts Diagram/s
#Gear,#Parts,#RB3-0092-000CN
15 tooth gear with drive shaft (Black plastic)
|
47222
RS7-0418-000CN
|
RS7-0418-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0418-000CN
26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
|
47226
RS7-0424-000CN
|
RS7-0424-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0424-000CN
Dual gear - 20 tooth / 40 tooth
|
47230
RS7-0425-000CN
|
RS7-0425-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0425-000CN
30 tooth gear (White plastic)
|
47234
RS7-0426-000CN
|
RS7-0426-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0426-000CN
Dual gear - 26 tooth / 50 tooth (White plastic)
|
47238
RS7-0428-000CN
|
RS7-0428-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0428-000CN
30 tooth gear (White plastic)
|
47242
RS7-0429-000CN
|
RS7-0429-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0429-000CN
26 tooth gear (White plastic) - Has recess for shaft drive pin
|
47252
RS7-0435-000CN
|
RS7-0435-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0435-000CN
Dual gear - 32 tooth / 37 tooth (White plastic)
|
47256
RS7-0436-000CN
|
RS7-0436-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0436-000CN
Dual gear - 37 tooth / 43 tooth (White plastic)
|
47260
RS7-0437-000CN
|
RS7-0437-000CN
View Parts Diagram/s
#Gear,#Parts,#RS7-0437-000CN
51 tooth gear (White plastic)
|
Gear Assembly
|
39875
RG5-6938-030CN
|
RG5-6938-030CN
View Parts Diagram/s
#Gear Assembly,#Parts,#RG5-6938-030CN
Gear assembly - Metal plate with two White plastic gears attached
|
Ground
|
32122
RB2-9942-000CN
|
RB2-9942-000CN
View Parts Diagram/s
#Ground,#Parts,#RB2-9942-000CN
Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boards
|
32372
RB3-0119-000CN
|
RB3-0119-000CN
View Parts Diagram/s
#Ground,#Parts,#RB3-0119-000CN
Grounding plate
|
Guide
|
32072
RB2-9903-000CN
|
RB2-9903-000CN
View Parts Diagram/s
#Guide,#Parts,#RB2-9903-000CN
Cable guide (Quartz Gray plastic)
|
32096
RB2-9912-000CN
|
RB2-9912-000CN
View Parts Diagram/s
#Guide,#Parts,#RB2-9912-000CN
Top output bin guide - Small curved ribbed black plastic piece
|
32129
RB2-9954-000CN
|
RB2-9954-000CN
View Parts Diagram/s
#Guide,#Parts,#RB2-9954-000CN
Left paper feed guide (small Black plastic arm)
|
32133
RB2-9955-000CN
|
RB2-9955-000CN
View Parts Diagram/s
#Guide,#Parts,#RB2-9955-000CN
Right paper feed guide (small Black plastic arm)
|
36562
RF5-4049-000CN
|
RF5-4049-000CN
View Parts Diagram/s
#Guide,#Parts,#RF5-4049-000CN
Entrance guide assembly - Angled metal guide between the registration roller and the transfer roller
|
39843
RG5-6929-000CN
|
RG5-6929-000CN
View Parts Diagram/s
#Guide,#Parts,#RG5-6929-000CN
Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers
|
39845
RG5-6930-000CN
|
RG5-6930-000CN
View Parts Diagram/s
#Guide,#Parts,#RG5-6930-000CN
Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear
|
39860
RG5-6935-020CN
|
RG5-6935-020CN
View Parts Diagram/s
#Guide,#Parts,#RG5-6935-020CN
Left cartridge guide assembly
|
39909
RG5-6951-000CN
|
RG5-6951-000CN
View Parts Diagram/s
#Guide,#Parts,#RG5-6951-000CN
Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1)
|
Hinge
|
31484
RB2-6405-000CN
|
RB2-6405-000CN
View Parts Diagram/s
#Hinge,#Parts,#RB2-6405-000CN
Tray hinge - For the left side of the multi-purpose front input tray (Tray 1)
|
103723
RB2-6406-000CN
|
RB2-6406-000CN
View Parts Diagram/s
#Hinge,#Parts,#RB2-6406-000CN
Tray hinge - For the right side of the multi-purpose front input tray (Tray 1)
|
Holder
|
32106
RB2-9924-000CN
|
RB2-9924-000CN
View Parts Diagram/s
#Holder,#Parts,#RB2-9924-000CN
Sensor assembly mounting holder
|
32143
RB3-0006-000CN
|
RB3-0006-000CN
View Parts Diagram/s
#Holder,#Parts,#RB3-0006-000CN
Holder - Housing for the fusing connector assembly
|
32192
RB3-0023-000CN
|
RB3-0023-000CN
View Parts Diagram/s
#Holder,#Parts,#RB3-0023-000CN
Interlock switch holder (Quartz Gray plastic) - Does NOT include the micro-switch
|
Insulator
|
32147
RB3-0007-000CN
|
RB3-0007-000CN
View Parts Diagram/s
#Insulator,#Parts,#RB3-0007-000CN
Insulating sheet (Transparent plastic)
|
32250
RB3-0056-000CN
|
RB3-0056-000CN
View Parts Diagram/s
#Insulator,#Parts,#RB3-0056-000CN
Insulating sheet (Transparent plastic)
|
Label
|
47171
RS6-8662-000CN
|
RS6-8662-000CN
View Parts Diagram/s
#Label,#Parts,#RS6-8662-000CN
Label for Color LaserJet 2500 Series, Color LaserJet 1500 Series, Color LaserJet 2550 Series
|
Laser Scanner
|
39791
RG5-6890-030CN
|
RG5-6890-030CN
View Parts Diagram/s
#Laser Scanner,#Parts,#RG5-6890-030CN
Laser/scanner assembly
|
Lever
|
32437
RB3-0178-000CN
|
RB3-0178-000CN
View Parts Diagram/s
#Lever,#Parts,#RB3-0178-000CN
Right side lock release lever
|
32441
RB3-0179-000CN
|
RB3-0179-000CN
View Parts Diagram/s
#Lever,#Parts,#RB3-0179-000CN
Left side lock release lever
|
Memory
|
0
Q7707AX
|
Q7707AX
#Memory,#Parts,#Q7707AX
32MB, 100-pin SDRAM DIMM memory module
|
0
Q7708AX
|
Q7708AX
#Memory,#Parts,#Q7708AX
64MB SDRAM - 100MHz synchronous DRAM - DIMM package
|
0
Q7709AX
|
Q7709AX
#Memory,#Parts,#Q7709AX
133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
|
Motor
|
36544
RF5-4010-020CN
|
RF5-4010-020CN
View Parts Diagram/s
#Motor,#Parts,#RF5-4010-020CN
Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assembly
|
39931
RG5-6958-000CN
|
RG5-6958-000CN
View Parts Diagram/s
#Motor,#Parts,#RG5-6958-000CN
Rotary motor assembly
|
41078
RH7-1625-000CN
|
RH7-1625-000CN
View Parts Diagram/s
#Motor,#Parts,#RH7-1625-000CN
Stepping motor - 24VDC
|
41086
RH7-1629-000CN
|
RH7-1629-000CN
View Parts Diagram/s
#Motor,#Parts,#RH7-1629-000CN
Stepping motor - 24V DC
|
Pad
|
105861
RB2-9960-000CN
|
RB2-9960-000CN
#Pad,#Parts,#RB2-9960-000CN
Separation pad assembly - Includes the gray plastic frame with the rubber insert strip - For the cassette on the 250-sheet and 500-sheet input tray assemblies - Mounts in the paper cassette tray assembly Replaced by RF5-4258-020CN
|
36546
RF5-4012-000CN
|
RF5-4012-000CN
View Parts Diagram/s
#Pad,#Parts,#RF5-4012-000CN
Separation pad assembly - Includes the separation pad, holder and spring
|
36557
RF5-4047-000CN
|
RF5-4047-000CN
View Parts Diagram/s
#Pad,#Parts,#RF5-4047-000CN
Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
|
Paper
|
26140
Q1298A
|
Q1298A
#Paper,#Parts,#Q1298A
LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
|
0
Q1298B
|
Q1298B
#Paper,#Parts,#Q1298B
LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
|
PC Board
|
21048
C9145-69001
|
C9145-69001
View Parts Diagram/s
#PC Board,#Parts,#C9145-69001
Formatter board assembly - Includes the formatter board and all the metal cage covers
|
102588
C9705-69003
|
C9705-69003
View Parts Diagram/s
#PC Board,#Parts,#C9705-69003
DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)
|
39945
RG5-6965-000CN
|
RG5-6965-000CN
View Parts Diagram/s
#PC Board,#Parts,#RG5-6965-000CN
Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly
|
40258
RG5-7609-000CN
|
RG5-7609-000CN
View Parts Diagram/s
#PC Board,#Parts,#RG5-7609-000CN
Carousel position and toner level photoelectric sensor PC board - `L` Shaped PC board with the two sensors
|
40268
RG5-7612-000CN
|
RG5-7612-000CN
View Parts Diagram/s
#PC Board,#Parts,#RG5-7612-000CN
Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
|
102660
RG5-7613-000CN
|
RG5-7613-000CN
View Parts Diagram/s
#PC Board,#Parts,#RG5-7613-000CN
Registration sensor PC Board - Small board with flag activated photosensor
|
41337
RH7-7158-000CN
|
RH7-7158-000CN
View Parts Diagram/s
#PC Board,#Parts,#RH7-7158-000CN
Density photoelectric sensor PC board
|
48585
WG8-5593-000CN
|
WG8-5593-000CN
View Parts Diagram/s
#PC Board,#Parts,#WG8-5593-000CN
Sensor PC board - Small board with flag activated photosensor
|
0
WG8-5836-000CN
|
WG8-5836-000CN
#PC Board,#Parts,#WG8-5836-000CN
PHOTOINTERRUPTER Stapler Stacker
|
PC Board Interface
|
24734
J3110A
|
J3110A
View Parts Diagram/s
#PC Board Interface,#Parts,#J3110A
Ethernet 10Base-T (RJ-45) EIO network HP JETDIRECT 600N internal print server PC board
|
24743
J3111A
|
J3111A
View Parts Diagram/s
#PC Board Interface,#Parts,#J3111A
Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA
|
24831
J4135A
|
J4135A
View Parts Diagram/s
#PC Board Interface,#Parts,#J4135A
JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers
|
24838
J4167A
|
J4167A
View Parts Diagram/s
#PC Board Interface,#Parts,#J4167A
JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors
|
24859
J6057AR
|
J6057AR
View Parts Diagram/s
#PC Board Interface,#Parts,#J6057AR
JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual
|
24862
J6058A
|
J6058A
View Parts Diagram/s
#PC Board Interface,#Parts,#J6058A
HP JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot
|
24882
J7934G
|
J7934G
View Parts Diagram/s
#PC Board Interface,#Parts,#J7934G
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
|
Plate
|
32160
RB3-0010-030CN
|
RB3-0010-030CN
View Parts Diagram/s
#Plate,#Parts,#RB3-0010-030CN
Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through
|
32252
RB3-0057-000CN
|
RB3-0057-000CN
View Parts Diagram/s
#Plate,#Parts,#RB3-0057-000CN
Transfer slide plate - Small 'U' shaped metal insert plates
|
32306
RB3-0065-000CN
|
RB3-0065-000CN
View Parts Diagram/s
#Plate,#Parts,#RB3-0065-000CN
Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor
|
32310
RB3-0066-000CN
|
RB3-0066-000CN
View Parts Diagram/s
#Plate,#Parts,#RB3-0066-000CN
Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor
|
32452
RB3-0286-000CN
|
RB3-0286-000CN
View Parts Diagram/s
#Plate,#Parts,#RB3-0286-000CN
Contact plate for HP Color LaserJet 2500 Seriess
|
Power Cord
|
0
8120-6800
|
8120-6800
#Power Cord,#Parts,#8120-6800
Power cord (Flint Gray) - 3-wire, 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)
|
9601
8120-6809
|
8120-6809
View Parts Diagram/s
#Power Cord,#Parts,#8120-6809
Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
|
9602
8120-6811
|
8120-6811
View Parts Diagram/s
#Power Cord,#Parts,#8120-6811
Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
|
102739
8120-6812
|
8120-6812
View Parts Diagram/s
#Power Cord,#Parts,#8120-6812
Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan)
|
9605
8120-6813
|
8120-6813
View Parts Diagram/s
#Power Cord,#Parts,#8120-6813
Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
|
9607
8120-6814
|
8120-6814
View Parts Diagram/s
#Power Cord,#Parts,#8120-6814
Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark)
|
9609
8120-6815
|
8120-6815
View Parts Diagram/s
#Power Cord,#Parts,#8120-6815
Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland)
|
Power Supply
|
39935
RG5-6960-000CN
|
RG5-6960-000CN
View Parts Diagram/s
#Power Supply,#Parts,#RG5-6960-000CN
High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer
|
40282
RG5-7616-000CN
|
RG5-7616-000CN
View Parts Diagram/s
#Power Supply,#Parts,#RG5-7616-000CN
Sub-high voltage board - Small auxillary PC board
|
102667
RH3-2241-000CN
|
RH3-2241-000CN
View Parts Diagram/s
#Power Supply,#Parts,#RH3-2241-000CN
Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
|
40684
RH3-2243-000CN
|
RH3-2243-000CN
View Parts Diagram/s
#Power Supply,#Parts,#RH3-2243-000CN
Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch
|
Pressure Assembly
|
39907
RG5-6943-020CN
|
RG5-6943-020CN
View Parts Diagram/s
#Pressure Assembly,#Parts,#RG5-6943-020CN
Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel
|
Pulley
|
32270
RB3-0061-000CN
|
RB3-0061-000CN
View Parts Diagram/s
#Pulley,#Parts,#RB3-0061-000CN
Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
|
32312
RB3-0067-000CN
|
RB3-0067-000CN
View Parts Diagram/s
#Pulley,#Parts,#RB3-0067-000CN
Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
|
Rack Slide
|
32329
RB3-0090-000CN
|
RB3-0090-000CN
View Parts Diagram/s
#Rack Slide,#Parts,#RB3-0090-000CN
Rack slide - White plastic piece with gear teeth layed out in rack form on both sides
|
Reader
|
40045
RG5-7131-000CN
|
RG5-7131-000CN
View Parts Diagram/s
#Reader,#Parts,#RG5-7131-000CN
E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
|
40049
RG5-7132-000CN
|
RG5-7132-000CN
View Parts Diagram/s
#Reader,#Parts,#RG5-7132-000CN
E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
|
Rod
|
32213
RB3-0037-000CN
|
RB3-0037-000CN
View Parts Diagram/s
#Rod,#Parts,#RB3-0037-000CN
Power switch rod - Goes between the power button and the power switch on the low voltage power supply board
|
Roller
|
31570
RB2-7195-000CN
|
RB2-7195-000CN
View Parts Diagram/s
#Roller,#Supplies,#RB2-7195-000CN
Sensor flag roller (small White plastic roller)
|
32088
RB2-9908-000CN
|
RB2-9908-000CN
View Parts Diagram/s
#Roller,#Supplies,#RB2-9908-000CN
Pressure roller (small Black hard plastic disk shaped roller)
|
32090
RB2-9909-000CN
|
RB2-9909-000CN
View Parts Diagram/s
#Roller,#Supplies,#RB2-9909-000CN
Pressure roller (small Black hard plastic 'solid' roller)
|
32169
RB3-0012-000CN
|
RB3-0012-000CN
View Parts Diagram/s
#Roller,#Supplies,#RB3-0012-000CN
Belt roller - Small oval shaped roller approximately 1-3/4 inches long
|
32418
RB3-0160-000CN
|
RB3-0160-000CN
View Parts Diagram/s
#Roller,#Supplies,#RB3-0160-000CN
Paper pickup roller ('D' shaped)
|
36555
RF5-4040-020CN
|
RF5-4040-020CN
View Parts Diagram/s
#Roller,#Supplies,#RF5-4040-020CN
Transfer roller assembly - Long black foam type roller - Transfers static charge to paper Part RF5-4040-000CN is no longer supplied. Please order the replacement, RF5-4040-020CN
|
39799
RG5-6897-020CN
|
RG5-6897-020CN
View Parts Diagram/s
#Roller,#Supplies,#RG5-6897-020CN
Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
|
39865
RG5-6936-000CN
|
RG5-6936-000CN
View Parts Diagram/s
#Roller,#Supplies,#RG5-6936-000CN
Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear
|
103924
RG5-6939-020CN
|
RG5-6939-020CN
View Parts Diagram/s
#Roller,#Supplies,#RG5-6939-020CN
Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
|
39915
RG5-6952-020CN
|
RG5-6952-020CN
View Parts Diagram/s
#Roller,#Supplies,#RG5-6952-020CN
Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
|
Service Manual
|
0
Q9705A-Manual_Color
|
Q9705A-Manual_Color
#Service Manual,#Service Guide,#Q9705A-Manual_Color
Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
|
Shaft
|
31075
RB2-4933-000CN
|
RB2-4933-000CN
View Parts Diagram/s
#Shaft,#Parts,#RB2-4933-000CN
Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever
|
32165
RB3-0011-000CN
|
RB3-0011-000CN
View Parts Diagram/s
#Shaft,#Parts,#RB3-0011-000CN
Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley
|
32265
RB3-0060-020CN
|
RB3-0060-020CN
View Parts Diagram/s
#Shaft,#Parts,#RB3-0060-020CN
Idler gear shaft - Short metal rod
|
Shield
|
32115
RB2-9932-000CN
|
RB2-9932-000CN
View Parts Diagram/s
#Shield,#Parts,#RB2-9932-000CN
RFI shield - Parallel wire form mounted over the fan
|
Shutter
|
39892
RG5-6940-050CN
|
RG5-6940-050CN
View Parts Diagram/s
#Shutter,#Parts,#RG5-6940-050CN
Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
|
Sideplate
|
39851
RG5-6932-070CN
|
RG5-6932-070CN
View Parts Diagram/s
#Sideplate,#Parts,#RG5-6932-070CN
Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side
|
39853
RG5-6934-000CN
|
RG5-6934-000CN
View Parts Diagram/s
#Sideplate,#Parts,#RG5-6934-000CN
Right rear side plate assembly - Includes the rear half of the metal right side plate, the fusing assembly drive motor and the three associated gears
|
39901
RG5-6942-030CN
|
RG5-6942-030CN
View Parts Diagram/s
#Sideplate,#Parts,#RG5-6942-030CN
Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame
|
Solenoid
|
41260
RH7-5337-000CN
|
RH7-5337-000CN
View Parts Diagram/s
#Solenoid,#Parts,#RH7-5337-000CN
Solenoid assembly
|
41297
RH7-5384-000CN
|
RH7-5384-000CN
View Parts Diagram/s
#Solenoid,#Parts,#RH7-5384-000CN
Solenoid assembly
|
Spring
|
32081
RB2-9905-000CN
|
RB2-9905-000CN
View Parts Diagram/s
#Spring,#Parts,#RB2-9905-000CN
Torsion spring for HP Color LaserJet 2500 Series
|
32086
RB2-9906-000CN
|
RB2-9906-000CN
View Parts Diagram/s
#Spring,#Parts,#RB2-9906-000CN
Torsion spring for HP Color LaserJet 1500 Series
|
32125
RB2-9952-000CN
|
RB2-9952-000CN
View Parts Diagram/s
#Spring,#Parts,#RB2-9952-000CN
Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
|
32175
RB3-0015-000CN
|
RB3-0015-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0015-000CN
Compression spring
|
32179
RB3-0016-000CN
|
RB3-0016-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0016-000CN
Electrical contact spring - Spring steel wire with compression springs formed on both ends
|
32216
RB3-0042-000CN
|
RB3-0042-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0042-000CN
Electrical contact spring
|
32220
RB3-0043-000CN
|
RB3-0043-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0043-000CN
Electrical contact spring
|
32224
RB3-0044-000CN
|
RB3-0044-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0044-000CN
Electrical contact spring
|
32229
RB3-0045-000CN
|
RB3-0045-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0045-000CN
Electrical contact spring
|
32234
RB3-0046-000CN
|
RB3-0046-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0046-000CN
Electrical contact spring
|
32238
RB3-0047-000CN
|
RB3-0047-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0047-000CN
Electrical contact spring
|
32242
RB3-0048-000CN
|
RB3-0048-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0048-000CN
Electrical contact spring
|
32382
RB3-0121-000CN
|
RB3-0121-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0121-000CN
Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
|
32386
RB3-0122-000CN
|
RB3-0122-000CN
View Parts Diagram/s
#Spring,#Parts,#RB3-0122-000CN
Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
|
47018
RS6-2030-000CN
|
RS6-2030-000CN
View Parts Diagram/s
#Spring,#Parts,#RS6-2030-000CN
Tension spring for HP Color LaserJet 1500 Series
|
47151
RS6-2759-000CN
|
RS6-2759-000CN
View Parts Diagram/s
#Spring,#Parts,#RS6-2759-000CN
Compression spring
|
47157
RS6-2766-000CN
|
RS6-2766-000CN
View Parts Diagram/s
#Spring,#Parts,#RS6-2766-000CN
Tension spring for HP Color LaserJet 1500 Series
|
Static Dissipater
|
32151
RB3-0009-000CN
|
RB3-0009-000CN
View Parts Diagram/s
#Static Dissipater,#Parts,#RB3-0009-000CN
Static eliminator ground plate - Right angled metal piece with small teeth on top edge
|
Support
|
32278
RB3-0062-000CN
|
RB3-0062-000CN
View Parts Diagram/s
#Support,#Parts,#RB3-0062-000CN
PC board support (Black plastic holder)
|
39817
RG5-6907-030CN
|
RG5-6907-030CN
View Parts Diagram/s
#Support,#Parts,#RG5-6907-030CN
Laser/scanner support assembly (sheet metal plate)
|
Switch
|
41314
RH7-6051-000CN
|
RH7-6051-000CN
View Parts Diagram/s
#Switch,#Parts,#RH7-6051-000CN
Microswitch with lever activator
|
Thermistor
|
41344
RH7-7159-000CN
|
RH7-7159-000CN
View Parts Diagram/s
#Thermistor,#Parts,#RH7-7159-000CN
Thermistor for HP Color LaserJet 2820 Series
|
Tray
|
32184
RB3-0019-000CN
|
RB3-0019-000CN
View Parts Diagram/s
#Tray,#Parts,#RB3-0019-000CN
Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum
|
32434
RB3-0176-000CN
|
RB3-0176-000CN
View Parts Diagram/s
#Tray,#Parts,#RB3-0176-000CN
Face-Up output tray door (ONLY)
|
39847
RG5-6931-000CN
|
RG5-6931-000CN
View Parts Diagram/s
#Tray,#Parts,#RG5-6931-000CN
Face-up output tray assembly - Includes the pull-down door and fusing assembly locking bracket (Does NOT include the lock releases)
|
Tray Assembly
|
21442
C9698A
|
C9698A
#Tray Assembly,#Parts,#C9698A
Optional 250 sheet paper input tray - Includes tray base which attaches to printer, and the slide out paper tray - Accommodates 148mm x 210mm (5.8 x 8.3 inches) to 216mm x 356mm (8.5 x 14 inches) media - Only one 250 sheet tray supported per printer
|
101978
C9699A
|
C9699A
#Tray Assembly,#Parts,#C9699A
Optional 500 sheet paper input tray - Includes tray base which attaches to tray 2, and the slide out paper tray - Accommodates 216mm x 279mm (8.5 x 11 inches) or 210mm x 279mm (8.3 x 11.7 inches) media - Optional 250 sheet tray must be installed first
|
39868
RG5-6937-000CN
|
RG5-6937-000CN
View Parts Diagram/s
#Tray Assembly,#Parts,#RG5-6937-000CN
Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
|