| |
|
|
RM1-2360-000CN
Fan cable assembly - Connects Fan Driver board to fans FM5, FM6 and FM7 - Also connects Fan Driver board to Sub Power Supply board and DC Controller board
|
|
|
C5374-80004
Cable assembly - Has 15-pin (F) connectors - 75.7cm (29.8in) long
|
RG1-4231-020CN
Fuser cable - Main fuser cable for LaserJet 4300 series
|
|
|
C4723-60025
Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.7m (5.6ft) long
|
|
|
Q3093-80003
Ethernet cable (Black) - Category 3 with fast ethernet (FE)
|
RG5-1442-000CN
Cable assembly - 4-pin (F) connector to 3-pin (F) connector - 31.1cm (12.3in) long
|
|
|
Q1647-80001
Scanner trailing cable - Connect the scanner assembly to the main logic PC board
|
C2678-60111
Motor harness cable assembly - 15-pin (F) connector to a 27.4cm (10.8in) cable with a 6-pin (F) connector, a 34cm (13.4in) cable with a 2-pin (F) connector, and a 40.6cm (16in) cable with a 6-pin (F) connector
|
|
|
RG5-3787-000CN
Dual cable assembly - One cable is a large 12-pin (F) connector to a grounding wire with a ring terminal and a 5-pin (F) connector - Other cable has four connectors: a 14-pin (F), two 8-pin (F), and a 7-pin (F) - Overall length is 39.4cm (15.5in)
|
|
|
RM1-2605-000CN
Driver cable - From DC Controller board to Driver board
|
RM1-0493-000CN
Environment sensor cable - Cable between humidity sensor and DC Controller board
|
C7770-60147
Carriage assembly trailing cable kit - CABLE ONLY - NO LONGER INCLUDES installation instructions trailing cables mounting clips and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models
|
RM1-2384-000CN
Intermediate paper transfer unit (IPTU) drawer connector cable assembly
|
RG5-3886-000CN
Fuser sensor cable - From fuser sensors to DC controller
|
8120-8920
Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey)
|
|
|
|
|
RG5-6148-000CN
Laser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA
|
|
|
|
|
|
|
RG5-7073-000CN
Cable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector
|
|
|
|
|
C2356-60504
Hammer driver cable assembly - Six ribbon cables with 16-pin (F) connectors and a cable with both a 2-pin (F) connector and a ring terminal - Attached to mounting hardware and the column scale - Overall length is 102cm (40in)
|
|
|
|
|
C3803-60013
Rear panel power socket/power cable assembly - C14 (M) power socket to an 18cm (7.1in) cable with a 3-pin (F) connector and a 22.3cm (8.8in) ground wire with a ring terminal
|
|