|
| |
XD2-1100-502CN is represented by #42 in the diagram below.
Front Frame Assembly
- 1
- 1 RB2-9952-000CN - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
- 2
- 2 RB9-0889-000CN - Tray hinge - 'L' shaped plastic arm - For the left side of the multi-purpose front input tray (tray 1)
- 3
- 3 RB9-0890-000CN - Tray hinge - 'L' shaped plastic arm - For the right side of the multipurpose front input tray (tray 1)
- 4
- 4 RB2-3043-000CN - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
- 5
- 5 RB2-3044-000CN - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
- 6
- 6 RB3-1108-000CN - Front inner cover (Graphite Black plastic) - Mounts on the front frame above the multi-purpose input tray
- 7
- 7 RB9-0897-000CN - Front lower cover (Graphite Black plastic) - Front lower strip below the multipurpose input tray - Has recessed area for the printer logo
- 8
- 8 RB2-6248-000CN - Damper assembly (Gray plastic piece with small 13-tooth gear on it)
- 9
- 9 RB3-0104-000CN - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
- 10
- 10 RB3-0111-000CN - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
- 12
- 12 RB3-0120-000CN - Solenoid cover (Steel) - For magnetic wave sheilding
- 12 RB3-0120-020CN - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
- 13
- 13 RB3-0121-000CN - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
- 14
- 14 RB3-0122-000CN - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
- 16
- 16 RH7-5338-000CN - Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
- 16 RH7-5383-000CN - Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
- 17
- 17 RF5-4012-000CN - Separation pad assembly - Includes the separation pad, holder and spring
- 19
- 19 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
- 19 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 19
- 19 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
- 19 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 19
- 19 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
- 19 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 19
- 19 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
- 19 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
- 19 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 19 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 19
- 19 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
- 19 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 20
- 20 RS7-0418-000CN - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
- 23
- 23 RS7-0429-000CN - 26 tooth gear (White plastic) - Has recess for shaft drive pin
- 24
- 24 WG8-5382-000CN - Sensor PC board - Small board with flag activated photosensor
- 24 WG8-5593-000CN - Sensor PC board - Small board with flag activated photosensor
- 25
- 25 RG5-7585-000CN - Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender - Mounts on front of printer (on the front frame assembly)
- 26
- 26 RG5-6938-000CN - Gear assembly - Metal plate with two White plastic gears attached
- 26 RG5-6938-030CN - Gear assembly - Metal plate with two White plastic gears attached
- 27
- 27 RG5-7584-000CN - Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1)
- 28
- 28 RG5-6952-000CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
- 28 RG5-6952-020CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
- 29
- 29 WT2-5700-000CN - Cable clamp - White plastic clamp with mounting pin
- 30
- 30 RG5-6956-000CN - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
- 30 RG5-7131-000CN - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
- 34
- 34 RF5-4047-000CN - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
- 36
- 36 RS6-8662-000CN - Label for Color LaserJet 2500 Series, Color LaserJet 1500 Series, Color LaserJet 2550 Series
- 39
- 39 RG5-6966-000CN - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
- 39 RG5-7612-000CN - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
- 40
- 40 RG5-7607-000CN - Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge
- 40 RG5-7648-000CN - Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge
1
RB2-9952-000CN
Spring
Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
2
RB9-0889-000CN
Hinge
Tray hinge - 'L' shaped plastic arm - For the left side of the multi-purpose front input tray (tray 1)
3
RB9-0890-000CN
Hinge
Tray hinge - 'L' shaped plastic arm - For the right side of the multipurpose front input tray (tray 1)
4
RB2-3043-000CN
Bushing
Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
5
RB2-3044-000CN
Bushing
Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
6
RB3-1108-000CN
Cover
Front inner cover (Graphite Black plastic) - Mounts on the front frame above the multi-purpose input tray
7
RB9-0897-000CN
Cover
Front lower cover (Graphite Black plastic) - Front lower strip below the multipurpose input tray - Has recessed area for the printer logo
8
RB2-6248-000CN
Damper
Damper assembly (Gray plastic piece with small 13-tooth gear on it)
9
RB3-0104-000CN
Cover
Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
10
RB3-0111-000CN
Flag
Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
12
RB3-0120-020CN
Cover
Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
13
RB3-0121-000CN
Spring
Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
14
RB3-0122-000CN
Spring
Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
16
RH7-5338-000CN
Solenoid
Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
16
RH7-5383-000CN
Solenoid
Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
17
RF5-4012-000CN
Pad
Separation pad assembly - Includes the separation pad, holder and spring
19
XA9-1262-000CN
Screw
M4 pan-head phillips screw with self-tapping threads - 10mm long
19
XA9-1262-000CN
Screw
M4 pan-head phillips screw with self-tapping threads - 10mm long
19
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
19
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
20
RS7-0418-000CN
Gear
26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
23
RS7-0429-000CN
Gear
26 tooth gear (White plastic) - Has recess for shaft drive pin
24
WG8-5382-000CN
PC Board
Sensor PC board - Small board with flag activated photosensor
24
WG8-5593-000CN
PC Board
Sensor PC board - Small board with flag activated photosensor
25
RG5-7585-000CN
Tray Assembly
Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender - Mounts on front of printer (on the front frame assembly)
26
RG5-6938-000CN
Gear
Gear assembly - Metal plate with two White plastic gears attached
26
RG5-6938-030CN
Gear Assembly
Gear assembly - Metal plate with two White plastic gears attached
27
RG5-7584-000CN
Guide
Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1)
28
RG5-6952-000CN
Roller
Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
28
RG5-6952-020CN
Roller
Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
30
RG5-6956-000CN
Reader
E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
30
RG5-7131-000CN
Reader
E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
34
RF5-4047-000CN
Pad
Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
36
RS6-8662-000CN
Label
Label for Color LaserJet 2500 Series, Color LaserJet 1500 Series, Color LaserJet 2550 Series
39
RG5-6966-000CN
PC Board
Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
39
RG5-7612-000CN
PC Board
Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
40
RG5-7607-000CN
PC Board
Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge
40
RG5-7648-000CN
PC Board
Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge
|
|