XB2-4300-605CN is represented by #52 in the diagram below.
Middle Frame Assembly
- 1
- 1 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 1 RB1-8668-030CN - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
- 2
- 2 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 2 RB3-0061-000CN - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
- 2
- 2 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 2 RB3-0061-000CN - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
- 3
- 3 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 3 RB3-0063-000CN - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
- 3
- 3 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 3 RB3-0063-000CN - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
- 3
- 3 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 3 RB3-0063-000CN - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
- 3
- 3 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 3 RB3-0063-000CN - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
- 6
- 6 RB3-0009-000CN - Static eliminator ground plate - Right angled metal piece with small teeth on top edge
- 7
- 7 RB3-0010-030CN - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through
- 8
- 8 Q3948-67919 - Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
- 8 Q3948-67919 - Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
- 8 RB3-0011-000CN - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley
- 9
- 9 Q3948-67919 - Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
- 9 RB3-0012-000CN - Belt roller - Small oval shaped roller approximately 1-3/4 inches long
- 12
- 12 RB3-0016-000CN - Electrical contact spring - Spring steel wire with compression springs formed on both ends
- 13
- 13 Q3948-67919 - Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
- 13 RB3-0022-000CN - 22 tooth gear (Black plastic) - Small gear with diagonally cut teeth
- 21
- 21 RB3-1110-000CN - Insulating sheet (Transparent plastic) - For the power supply base assembly
- 22
- 22 Q3948-67920 - Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
- 22 RB3-0057-000CN - Transfer slide plate - Small 'U' shaped metal insert plates
- 23
- 23 WS1-6336-000CN - Connector assembly - For optional bottom paper tray
- 26
- 26 RG5-6939-000CN - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
- 26 RG5-6939-020CN - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
- 28
- 28 RG5-6940-050CN - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
- 29
- 29 RG5-7122-000CN - Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector
- 30
- 30 RB3-0052-000CN - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
- 31
- 31 RB3-0065-000CN - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor
- 32
- 32 RB3-0066-000CN - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor
- 33
- 33 RB2-9925-000CN - Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
- 36
- 36 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 36 RB3-0067-000CN - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
- 36
- 36 Q3948-67918 - Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
- 36 RB3-0067-000CN - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
- 38
- 38 WG8-5593-000CN - Sensor PC board - Small board with flag activated photosensor
- 40
- 40 RB2-9851-000CN - Terminal contact plate - Provides for a connection between the high voltage cable assembly and the r
- 40 RB2-9851-020CN - Terminal contact plate - Provides for a connection between the high voltage cable assembly and the rear toner cartridge contact spring
- 41
- 41 RB2-9850-000CN - Terminal contact plate - Provides for a connection between the high voltage cable assembly and the f
- 41 RB2-9850-020CN - Terminal contact plate - Provides for a connection between the high voltage cable assembly and the front toner cartridge contact spring
- 42
- 42 WT2-5610-000CN - Cable clip - White plastic push-in clip with mounting pin
- 42 WT2-5737-000CN - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other
- 44
- 44 WT2-5700-000CN - Cable clamp - White plastic clamp with mounting pin
- 45
- 45 Q3948-67919 - Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
- 45 RB2-9999-000CN - Torsion spring for HP Color LaserJet 2820 Series
- 46
- 46 Q3948-67920 - Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
- 46 RF5-4067-030CN - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper
- 47
- 47 Q3948-67920 - Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
- 47 RB3-1094-000CN - Bushing assembly (Black plastic bushing with small guide roller on top)
- 48
- 48 Q3948-67920 - Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
- 48 RB3-0015-000CN - Compression spring
- 50
- 50 RB3-1088-000CN - Transfer inlet guide assembly - Angled metal guide between the registration roller and the transfer roller
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 51
- 51 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 52
- 52 XB2-4300-605CN - M3 pan-head phillips screw with flat washer - 6mm long
- 52 XB2-4300-605CN - M3 pan-head phillips screw with flat washer - 6mm long
1
Q3948-67918
Belt
Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
1
RB1-8668-030CN
Belt
Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
2
Q3948-67918
Belt
Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
2
RB3-0061-000CN
Pulley
Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
2
RB3-0061-000CN
Pulley
Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
3
Q3948-67918
Belt
Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
3
RB3-0063-000CN
Belt
Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
3
RB3-0063-000CN
Belt
Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
6
RB3-0009-000CN
Static Dissipater
Static eliminator ground plate - Right angled metal piece with small teeth on top edge
7
RB3-0010-030CN
Plate
Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through
8
Q3948-67919
Shaft
Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
8
Q3948-67919
Shaft
Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
8
RB3-0011-000CN
Shaft
Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley
9
Q3948-67919
Shaft
Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
9
RB3-0012-000CN
Roller
Belt roller - Small oval shaped roller approximately 1-3/4 inches long
12
RB3-0016-000CN
Spring
Electrical contact spring - Spring steel wire with compression springs formed on both ends
13
Q3948-67919
Shaft
Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
13
RB3-0022-000CN
Gear
22 tooth gear (Black plastic) - Small gear with diagonally cut teeth
21
RB3-1110-000CN
Insulator
Insulating sheet (Transparent plastic) - For the power supply base assembly
22
Q3948-67920
Roller
Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
22
RB3-0057-000CN
Plate
Transfer slide plate - Small 'U' shaped metal insert plates
26
RG5-6939-000CN
Registration
Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
26
RG5-6939-020CN
Roller
Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
28
RG5-6940-050CN
Shutter
Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
29
RG5-7122-000CN
Cable
Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector
30
RB3-0052-000CN
Cover
Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
31
RB3-0065-000CN
Plate
Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor
32
RB3-0066-000CN
Plate
Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor
33
RB2-9925-000CN
Flag
Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
36
Q3948-67918
Belt
Feed belt kit - Includes one paper feed guide drive (large) belt, two 3-belt pulley rollers, two 1-belt pulley rollers, and eight paper feed (small) belts
36
RB3-0067-000CN
Pulley
Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
36
RB3-0067-000CN
Pulley
Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
38
WG8-5593-000CN
PC Board
Sensor PC board - Small board with flag activated photosensor
40
RB2-9851-000CN
Plate
Terminal contact plate - Provides for a connection between the high voltage cable assembly and the r
40
RB2-9851-020CN
Plate
Terminal contact plate - Provides for a connection between the high voltage cable assembly and the rear toner cartridge contact spring
41
RB2-9850-000CN
Plate
Terminal contact plate - Provides for a connection between the high voltage cable assembly and the f
41
RB2-9850-020CN
Plate
Terminal contact plate - Provides for a connection between the high voltage cable assembly and the front toner cartridge contact spring
42
WT2-5610-000CN
Clip
Cable clip - White plastic push-in clip with mounting pin
42
WT2-5737-000CN
Connector
Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other
45
Q3948-67919
Shaft
Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear
46
Q3948-67920
Roller
Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
46
RF5-4067-030CN
Roller
Transfer roller assembly - Long black foam type roller - Transfers static charge to paper
47
Q3948-67920
Roller
Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
47
RB3-1094-000CN
Bushing
Bushing assembly (Black plastic bushing with small guide roller on top)
48
Q3948-67920
Roller
Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
50
RB3-1088-000CN
Guide
Transfer inlet guide assembly - Angled metal guide between the registration roller and the transfer roller
51
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
51
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
|