|
| |
XA9-1447-000CN is represented by #2 in the diagram below.
Internal components
- 2
- 2 XA9-1447-000CN - M12 pan-head Phillips screw with annular nails - 8mm long
- 3
- 3 RM1-1398-000CN - Image scanner cable - From DC Controller board to image scanner assembly
- 7
- 7 RU5-0045-020CN - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
- 8
- 8 RU5-0256-000CN - 23 tooth gear - Located on right side under paper pickup drive assembly
- 9
- 9 RC1-0167-000CN - Tension spring - Provides tension for paper size sensor (PS102)
- 10
- 10 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
- 11
- 11 RM1-0037-020CN - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
- 11
- 11 RM1-0037-020CN - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
- 13
- 13 RM1-0036-000CN - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette
- 13 RM1-0036-020CN - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side
- 14
- 14 RC1-0061-000CN - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
- 15
- 15 RC1-0060-030CN - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
- 15 RC1-0060-050CN - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
- 16
- 16 XA9-1500-000CN - M3 pan-head Phillips screw with flat washer - 8mm long
- 18
- 18 RM1-1367-000CN - Laser scanner cable - From DC Controller board to Laser Scanner assembly
- 19
- 19 RM1-1372-000CN - Scanner joint cable - From DC Controller to J1422D - Scanner motor and beam detect PCA
- 20
- 20 RM1-0034-070CN - Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced
- 22
- 22 RM1-1010-000CN - Paper sensing guide - Paper guide/flag assembly with sensor (PS101)
- 23
- 23 RM1-0012-020CN - Paper feed assembly - Includes torsion spring and paper feed roller assembly
- 24
- 24 RK2-0359-000CN - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
- 25
- 25 RK2-0278-000CN - Cooling fan - Located on left side of printer (FN101)
- 26
- 26 RK2-0280-000CN - Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area
2
XA9-1447-000CN
Screw
M12 pan-head Phillips screw with annular nails - 8mm long
3
RM1-1398-000CN
Cable
Image scanner cable - From DC Controller board to image scanner assembly
7
RU5-0045-020CN
Gear
18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
8
RU5-0256-000CN
Gear
23 tooth gear - Located on right side under paper pickup drive assembly
9
RC1-0167-000CN
Spring
Tension spring - Provides tension for paper size sensor (PS102)
10
WG8-5624-000CN
Sensor
Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
11
RM1-0037-020CN
Roller
Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
11
RM1-0037-020CN
Roller
Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
12
RC1-2758-000CN
Torque Limiter
Torque limiter - Limits rotation of feed rollers
13
RM1-0036-000CN
Roller
Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette
13
RM1-0036-020CN
Roller
Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side
14
RC1-0061-000CN
Feeder
Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
15
RC1-0060-030CN
Flag
Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
15
RC1-0060-050CN
Feeder
Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly
18
RM1-1367-000CN
Cable
Laser scanner cable - From DC Controller board to Laser Scanner assembly
19
RM1-1372-000CN
Cable
Scanner joint cable - From DC Controller to J1422D - Scanner motor and beam detect PCA
20
RM1-0034-070CN
Pickup Assembly
Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced
22
RM1-1010-000CN
Flag
Paper sensing guide - Paper guide/flag assembly with sensor (PS101)
23
RM1-0012-020CN
Flag
Paper feed assembly - Includes torsion spring and paper feed roller assembly
24
RK2-0359-000CN
Sensor
Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
26
RK2-0280-000CN
Fan
Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area
|
|