|
| |
RM1-1283-000CN is represented by #7 in the diagram below.
Internal components
- 1
- 1 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 1 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 2
- 2 RC1-3796-000CN - Transfer Guide Open label - Located on registration roller assembly
- 3
- 3 RM1-4244-000CN - Registration assembly - Set of rollers before toner cartridge and after feed rollers
- 5
- 5 RM1-1321-000CN - Shutter link assembly - Spring loaded link which engages the shutter on the laser/scanner assembly (blocking the laser beam) when the toner cartridge access door is opened - Mounts on the left front of the laser/scanner support shelf
- 7
- 7 RM1-1283-000CN - Top sensor assembly - Includes the bracket and flags for the top of page detection sensor (PS912), and paper width detection sensor (PS913) - Mounts behind the registration roller assembly
- 9
- 9 XB4-7300-809CN - M3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long
- 11
- 11 XA9-1420-000CN - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long
1
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
1
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
2
RC1-3796-000CN
Label
Transfer Guide Open label - Located on registration roller assembly
3
RM1-4244-000CN
Roller
Registration assembly - Set of rollers before toner cartridge and after feed rollers
5
RM1-1321-000CN
Link
Shutter link assembly - Spring loaded link which engages the shutter on the laser/scanner assembly (blocking the laser beam) when the toner cartridge access door is opened - Mounts on the left front of the laser/scanner support shelf
7
RM1-1283-000CN
Sensor
Top sensor assembly - Includes the bracket and flags for the top of page detection sensor (PS912), and paper width detection sensor (PS913) - Mounts behind the registration roller assembly
9
XB4-7300-809CN
Screw
M3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long
11
XA9-1420-000CN
Screw
M3 pan head phillips screw with captive flat and split-lock washers - 8mm long
|
|