| |
RK2-1989-000CN is represented by #5 in the diagram below.
Internal components
- 1
- 1 RM1-5451-000CN - Fuser right guide assembly - For the LaserJet P4014 series
- 2
- 2 RM1-5082-000CN - Operation panel cable - Connects panel with the DC controller board
- 3
- 3 RK2-0359-000CN - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
- 4
- 4 RK2-1988-000CN - Cooling fan (FN101) - Fan that cools the cartridge and power supply area
- 5
- 5 RK2-1989-000CN - Cooling fan (FN103) - Fan that cools the cartridge area
- 6
- 6 RK2-1991-000CN - Cooling fan (FN301) - Fan that cools the cartridge and laser/scanner area
- 7
- 7 RK2-1992-000CN - Cooling fan (FN102) - Exhausts heat from toner cartridges
- 8
- 8 RC1-0136-000CN - Roller bushing - Bushing that supports middle of paper delivery roller
- 9
- 9 RM1-4526-000CN - Paper delivery drive assembly - Two gears mounted on a plate located on the paper delivery assembly
- 10
- 10 RM1-4582-000CN - DC controller PCB assembly
- 10 RM1-4582-030CN - DC controller board assembly - DC Controller for LaserJet P4014/P4015 series
- 10 RM1-4582-050CN - DC controller board assembly - DC Controller for LaserJet P4014/P4015 series
- 10 RM1-4582-050CN - DC controller board assembly - DC Controller for LaserJet P4014/P4015 series
- 10 RM1-4582-070CN - DC controller board assembly - DC Controller for LaserJet P4014/P4015 series
- 11
- 11 RM1-5051-000CN - Fuser motor (M299) assembly - Drives the pressure roller and feed roller when rotated counterclockwise it releases the fusing pressure for easier jam removal
- 12
- 12 RM1-5080-000CN - Door switch cable - Connects the door open detection switch to DC controller board (J78)
- 13
- 13 RM1-5088-000CN - Fuser motor cable - Connects fuser motor (M229) to the controller board
- 14
- 14 RM1-4585-000CN - Lifter drive assembly - Drives the lifting plate of the tray
- 15
- 15 RM1-5081-000CN - Media full sensor cable - Connects media full sensor (PS104) to DC controller board (J76)
- 16
- 16 RM1-5085-000CN - Envelope feeder cable - Connects envelope feeder to DC controller board
- 17
- 17 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
- 20
- 20 CB506-67901 - Fusing Assembly - For 110 VAC - Bonds toner to paper with heat
- 20 CB506-67902 - Fusing Assembly - For 220 VAC - Bonds toner to paper with heat
1
RM1-5451-000CN
Guide
Fuser right guide assembly - For the LaserJet P4014 series
2
RM1-5082-000CN
Cable
Operation panel cable - Connects panel with the DC controller board
3
RK2-0359-000CN
Sensor
Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
4
RK2-1988-000CN
Fan
Cooling fan (FN101) - Fan that cools the cartridge and power supply area
5
RK2-1989-000CN
Fan
Cooling fan (FN103) - Fan that cools the cartridge area
6
RK2-1991-000CN
Fan
Cooling fan (FN301) - Fan that cools the cartridge and laser/scanner area
7
RK2-1992-000CN
Fan
Cooling fan (FN102) - Exhausts heat from toner cartridges
8
RC1-0136-000CN
Bushing
Roller bushing - Bushing that supports middle of paper delivery roller
9
RM1-4526-000CN
Drive Assembly
Paper delivery drive assembly - Two gears mounted on a plate located on the paper delivery assembly
10
RM1-4582-030CN
PC Board
DC controller board assembly - DC Controller for LaserJet P4014/P4015 series
10
RM1-4582-050CN
PC Board
DC controller board assembly - DC Controller for LaserJet P4014/P4015 series
10
RM1-4582-070CN
PC Board
DC controller board assembly - DC Controller for LaserJet P4014/P4015 series
11
RM1-5051-000CN
Motor
Fuser motor (M299) assembly - Drives the pressure roller and feed roller when rotated counterclockwise it releases the fusing pressure for easier jam removal
12
RM1-5080-000CN
Cable
Door switch cable - Connects the door open detection switch to DC controller board (J78)
13
RM1-5088-000CN
Motor
Fuser motor cable - Connects fuser motor (M229) to the controller board
14
RM1-4585-000CN
Lifter
Lifter drive assembly - Drives the lifting plate of the tray
15
RM1-5081-000CN
Cable
Media full sensor cable - Connects media full sensor (PS104) to DC controller board (J76)
16
RM1-5085-000CN
Cable
Envelope feeder cable - Connects envelope feeder to DC controller board
17
WG8-5624-000CN
Sensor
Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
20
CB506-67901
Fuser Assembly
Fusing Assembly - For 110 VAC - Bonds toner to paper with heat
20
CB506-67902
Fuser Assembly
Fusing Assembly - For 220 VAC - Bonds toner to paper with heat
|