RH7-1537-000CN printer parts diagram.

12
 

RH7-1537-000CN is represented by #7 in the diagram below.

Internal Components
RH7-1537-000CN is represented by #7 in the diagram below.
  • 1
    • 1 RB3-0019-000CN - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum
  • 2
    • 2 RB2-9932-000CN - RFI shield - Parallel wire form mounted over the fan
  • 3
    • 3 RB9-0901-000CN - Airflow guide (duct) / fan holder bracket assembly (Alloy Gray plastic)
  • 4
    • 4 RB3-0091-000CN - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab
  • 6
    • 6 RB3-1113-000CN - Grounding plate - Small plate with grounding finger
  • 7
    • 7 RH7-1537-000CN - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
    • 7 RH7-1630-000CN - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
  • 8
    • 8 RH7-5366-000CN - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
    • 8 RH7-5389-000CN - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
  • 12
    • 12 RG5-6897-020CN - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
  • 14
    • 14 RH7-1628-000CN - Fusing motor assembly - 24VDC motor mounted on a motor controller PC board
  • 18
  • 19
    • 19 RG5-7579-000CN - Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears)
    • 19 RG5-7579-070CN - Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears)
  • 24
    • 24 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
    • 24 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 24
    • 24 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
    • 24 XA9-1262-000CN - M4 pan-head phillips screw with self-tapping threads - 10mm long
    • 24 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
    • 24 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 25
    • 25 XA9-0849-000CN - 4 M3 truss-head phillips screw with machine threads included - 6mm long
    • 25 XA9-1495-000CN - 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
  • 25
    • 25 XA9-0849-000CN - 4 M3 truss-head phillips screw with machine threads included - 6mm long
    • 25 XA9-0849-000CN - 4 M3 truss-head phillips screw with machine threads included - 6mm long
    • 25 XA9-1495-000CN - 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
    • 25 XA9-1495-000CN - 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
  • 26
    • 26 XA9-1355-000CN - M3 pan-head Phillips screw with machine threads - 8mm long
    • 26 XA9-1449-000CN - M3 pan-head Phillips screw with machine threads - 8mm long
1
RB3-0019-000CN Tray Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum
2
RB2-9932-000CN Shield RFI shield - Parallel wire form mounted over the fan
3
RB9-0901-000CN Airflow Guide Airflow guide (duct) / fan holder bracket assembly (Alloy Gray plastic)
4
RB3-0091-000CN Gear 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab
5
RB3-0092-000CN Gear 15 tooth gear with drive shaft (Black plastic)
6
RB3-1113-000CN Plate Grounding plate - Small plate with grounding finger
7
RH7-1537-000CN Fan Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
7
RH7-1630-000CN Fan Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
8
RH7-5366-000CN Clutch Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
8
RH7-5389-000CN Clutch Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
9
RH7-7149-000CN Thermistor Thermistor for HP Color LaserJet 2500 Series
9
RH7-7159-000CN Thermistor Thermistor for HP Color LaserJet 2820 Series
10
RG5-7160-000CN Cable Upper cable assembly (seven connectors)
10
RG5-7622-000CN Cable Upper cable assembly (seven connectors)
11
RG5-7145-000CN Cable Front cable assembly (six connectors)
12
RG5-6897-020CN Roller Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
13
RG5-7620-000CN Cable Cable assembly (two 5-pin connectors)
14
RH7-1628-000CN Motor Fusing motor assembly - 24VDC motor mounted on a motor controller PC board
15
RS7-0435-000CN Gear Dual gear - 32 tooth / 37 tooth (White plastic)
16
RS7-0436-000CN Gear Dual gear - 37 tooth / 43 tooth (White plastic)
17
RS7-0437-000CN Gear 51 tooth gear (White plastic)
18
RB2-9905-000CN Spring Torsion spring for HP Color LaserJet 2500 Series
19
RG5-7579-000CN Sideplate Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears)
19
RG5-7579-070CN Sideplate Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears)
20
XD2-1100-502CN Clip E-ring clip for HP Color LaserJet 1500 Series
23
RS6-8668-000CN Label High voltage caution label
24
XA9-1262-000CN Screw M4 pan-head phillips screw with self-tapping threads - 10mm long
24
XA9-1262-000CN Screw M4 pan-head phillips screw with self-tapping threads - 10mm long
24
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
24
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
25
XA9-0849-000CN Screw 4 M3 truss-head phillips screw with machine threads included - 6mm long
25
XA9-0849-000CN Screw 4 M3 truss-head phillips screw with machine threads included - 6mm long
25
XA9-1495-000CN Screw 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
25
XA9-1495-000CN Screw 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
26
XA9-1355-000CN Screw M3 pan-head Phillips screw with machine threads - 8mm long
26
XA9-1449-000CN Screw M3 pan-head Phillips screw with machine threads - 8mm long
27
XA9-1328-000CN Screw M3 pan-head Phillips screw - 10mm long
27
XA9-1501-000CN Screw M3 pan-head Phillips screw - 10mm long
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.