|
|
RC1-4127-000CN is represented by #39 in the diagram below.
Internal Components
- 1
- 1 RM1-1521-000CN - Laser/Scanner assembly - Mounts on top of print structure
- 1 RM1-1521-030CN - Laser/Scanner assembly - Mounts on top of print structure
- 2
- 2 RC1-4128-000CN - Plastic duct that vents air from the lower right front fan to the laser/scanner.
- 2 RC1-4128-020CN - Plastic duct that vents air from the lower right front fan to the laser/scanner.
- 3
- 3 RU5-2404-000CN - Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly
- 4
- 4 RC1-4125-000CN - Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly
- 5
- 5 RC1-4129-000CN - Small vent duct to route air from the fan (FM2) to the cartridge area
- 6
- 6 XB2-7300-605CN - Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal
- 8
- 8 RC1-4123-000CN - Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge
- 8 RC1-4123-020CN - Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge
- 9
- 9 RC1-3949-000CN - Left middle guide - Small black plastic cassette guide on left side of printer
- 10
- 10 RC1-4138-000CN - Cartridge lever - Link that pushes contact cam and protective plate when cartridge is inserted
- 12
- 12 RC1-3948-000CN - Left front guide - Small black plastic piece on front left side of chassis in Tray 2 cassette guide slot
- 14
- 14 RC1-3946-000CN - Front base plate - Metal plate that fits under fuser assembly
- 15
- 15 RC1-4055-000CN - Door arm - White plastic arm that connects to left side cartridge access door
- 16
- 16 RU5-2407-000CN - Tension spring - Provides tension for cartridge access door arm
- 17
- 17 RC1-4056-000CN - Door arm guide - White plastic guide for cartridge door lever
- 18
- 18 RC1-4059-000CN - Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Rear cartridge contact spring
- 19
- 19 RC1-4060-000CN - Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge
- 20
- 20 RC1-4061-000CN - Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring
- 21
- 21 RC1-4065-000CN - Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed
- 22
- 22 RC1-4066-000CN - Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge
- 22 RC1-4066-020CN - Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge
- 23
- 23 RC1-4067-000CN - Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge
- 24
- 24 RC1-4140-000CN - Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed
- 25
- 25 RU5-2410-000CN - Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed
- 25 RU5-2410-020CN - Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed
- 26
- 26 RU5-2403-000CN - Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted
- 27
- 27 RG5-1928-000CN - Registration cable assembly - Includes 7P and 3P connectors
- 27 VS1-7177-003CN - Retaining clip - This is a retaining clip for fuser thermistor power cable
- 29
- 29 RC1-4137-000CN - Contact cam - Vertical piece that inserts into protective plate
- 29 RC1-4137-020CN - Contact cam - Vertical piece that inserts into protective plate.
- 30
- 30 RK2-0573-000CN - Cooling fan - Fan FM2 - Located on lower left side of printer
- 33
- 33 RC1-4009-000CN - Plate holder - Holds the left rear corner of the paper access plate (duplex pan)
- 34
- 34 RC1-3950-000CN - Cassette guide - Rear left black plastic paper cassette guide
- 35
- 35 RC1-3951-000CN - Cassette guide - Right front side black plastic paper cassette guide
- 36
- 36 RC1-3953-000CN - Cassette guide - Right rear black plastic paper cassette guide
- 37
- 37 RC1-4126-000CN - Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly
- 38
- 38 RU5-2405-000CN - Compression spring - Provides pressure for E-reader holder
- 39
- 39 RC1-4127-000CN - Reader holder - E-label reader holder - Housing that holds cartridge E-label reader
- 40
- 40 RM1-1422-000CN - Reader and cable - E-label reader contact mechanism - Connection to read data from toner catrtridge - Includes cable
- 41
- 41 RM1-1516-000CN - Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
- 41 RM1-1516-040CN - Engine controller assembly - Engine controller PC board and metal pan - 110/127 VAC
- 41 RM1-1516-090CN - Engine controller assembly - engine controller pc board and metal pan - 110/127 vac
- 41 RM1-1516-100CN - Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
- 41 RM1-1524-040CN - Engine controller assembly - Engine controller PC board and metal pan - 220/240 VAC
- 41 RM1-1524-090CN - Engine controller assembly - Engine controller PC board and metal pan - 220-240 VAC
1
RM1-1521-000CN
Laser Scanner
Laser/Scanner assembly - Mounts on top of print structure
1
RM1-1521-030CN
Laser Scanner
Laser/Scanner assembly - Mounts on top of print structure
2
RC1-4128-000CN
Duct
Plastic duct that vents air from the lower right front fan to the laser/scanner.
2
RC1-4128-020CN
Duct
Plastic duct that vents air from the lower right front fan to the laser/scanner.
3
RU5-2404-000CN
Spring
Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly
4
RC1-4125-000CN
Link
Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly
5
RC1-4129-000CN
Duct
Small vent duct to route air from the fan (FM2) to the cartridge area
6
XB2-7300-605CN
Screw
Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal
8
RC1-4123-000CN
Lever
Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge
8
RC1-4123-020CN
Lever
Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge
9
RC1-3949-000CN
Guide
Left middle guide - Small black plastic cassette guide on left side of printer
10
RC1-4138-000CN
Lever
Cartridge lever - Link that pushes contact cam and protective plate when cartridge is inserted
12
RC1-3948-000CN
Guide
Left front guide - Small black plastic piece on front left side of chassis in Tray 2 cassette guide slot
14
RC1-3946-000CN
Plate
Front base plate - Metal plate that fits under fuser assembly
15
RC1-4055-000CN
Arm
Door arm - White plastic arm that connects to left side cartridge access door
16
RU5-2407-000CN
Spring
Tension spring - Provides tension for cartridge access door arm
17
RC1-4056-000CN
Guide
Door arm guide - White plastic guide for cartridge door lever
18
RC1-4059-000CN
Spring
Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Rear cartridge contact spring
19
RC1-4060-000CN
Contact
Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge
20
RC1-4061-000CN
Spring
Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring
21
RC1-4065-000CN
Lever
Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed
22
RC1-4066-000CN
Lever
Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge
22
RC1-4066-020CN
Lever
Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge
23
RC1-4067-000CN
Spring
Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge
24
RC1-4140-000CN
Spring
Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed
25
RU5-2410-000CN
Spring
Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed
25
RU5-2410-020CN
Spring
Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed
26
RU5-2403-000CN
Spring
Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted
27
RG5-1928-000CN
Cable
Registration cable assembly - Includes 7P and 3P connectors
27
VS1-7177-003CN
Connector
Retaining clip - This is a retaining clip for fuser thermistor power cable
29
RC1-4137-000CN
Cam
Contact cam - Vertical piece that inserts into protective plate
29
RC1-4137-020CN
Cam
Contact cam - Vertical piece that inserts into protective plate.
30
RK2-0573-000CN
Fan
Cooling fan - Fan FM2 - Located on lower left side of printer
33
RC1-4009-000CN
Holder
Plate holder - Holds the left rear corner of the paper access plate (duplex pan)
34
RC1-3950-000CN
Guide
Cassette guide - Rear left black plastic paper cassette guide
35
RC1-3951-000CN
Guide
Cassette guide - Right front side black plastic paper cassette guide
36
RC1-3953-000CN
Guide
Cassette guide - Right rear black plastic paper cassette guide
37
RC1-4126-000CN
Holder
Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly
38
RU5-2405-000CN
Spring
Compression spring - Provides pressure for E-reader holder
39
RC1-4127-000CN
Holder
Reader holder - E-label reader holder - Housing that holds cartridge E-label reader
40
RM1-1422-000CN
Reader
Reader and cable - E-label reader contact mechanism - Connection to read data from toner catrtridge - Includes cable
41
RM1-1516-000CN
PC Board
Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
41
RM1-1516-040CN
PC Board
Engine controller assembly - Engine controller PC board and metal pan - 110/127 VAC
41
RM1-1516-090CN
PC Board
Engine controller assembly - engine controller pc board and metal pan - 110/127 vac
41
RM1-1516-100CN
PC Board
Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
41
RM1-1524-040CN
PC Board
Engine controller assembly - Engine controller PC board and metal pan - 220/240 VAC
41
RM1-1524-090CN
PC Board
Engine controller assembly - Engine controller PC board and metal pan - 220-240 VAC
|
|