RB3-0135-000CN is represented by #15 in the diagram below.
Front Frame Assembly
- 1
- 1 RB2-9952-000CN - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
- 2
- 2 RB9-0890-000CN - Tray hinge - 'L' shaped plastic arm - For the right side of the multipurpose front input tray (tray 1)
- 3
- 3 RB9-0889-000CN - Tray hinge - 'L' shaped plastic arm - For the left side of the multi-purpose front input tray (tray 1)
- 4
- 4 RB2-3043-000CN - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
- 5
- 5 RB2-3044-000CN - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
- 6
- 6 RB2-6248-000CN - Damper assembly (Gray plastic piece with small 13-tooth gear on it)
- 7
- 7 Q3948-67914 - Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
- 7 Q3948-67914 - Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
- 7 RB3-1134-000CN - Internal cover (ONLY) - Curved plastic piece with recessed area for grasping the handle on the imaging drum/transfer assembly - Mounts towards the front of the printer just above the multipurpose tray
- 8
- 8 RB3-1135-000CN - Lower front cover - Rectangular plastic strip - Mounts just below the multipurpose input tray on the front of the printer
- 9
- 9 RB3-0104-000CN - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
- 10
- 10 RB3-0111-000CN - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
- 12
- 12 RB3-0120-000CN - Solenoid cover (Steel) - For magnetic wave sheilding
- 12 RB3-0120-020CN - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
- 13
- 13 RB3-0121-000CN - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
- 14
- 14 RB3-0122-000CN - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
- 16
- 16 RH7-5383-000CN - Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
- 17
- 17 Q3948-67907 - Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
- 17 RF5-4012-000CN - Separation pad assembly - Includes the separation pad, holder and spring
- 19
- 19 RS7-0418-000CN - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
- 20
- 20 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
- 20 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
- 20 RS7-0424-000CN - Dual gear - 20 tooth / 40 tooth
- 21
- 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 21
- 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 21
- 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
- 23
- 23 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
- 23 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
- 23 RS7-0429-000CN - 26 tooth gear (White plastic) - Has recess for shaft drive pin
- 24
- 24 WG8-5593-000CN - Sensor PC board - Small board with flag activated photosensor
- 25
- 25 RG5-7601-000CN - Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
- 26
- 26 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
- 26 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
- 26 RG5-6938-000CN - Gear assembly - Metal plate with two White plastic gears attached
- 26 RG5-6938-030CN - Gear assembly - Metal plate with two White plastic gears attached
- 27
- 27 RG5-7584-000CN - Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1)
- 28
- 28 Q3948-67907 - Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
- 28 Q3948-67912 - Paper pickup roller kit - Includes the `D` shaped the paper pickup roller assembly and the separation pad assembly - For the multipurpose front input tray (tray 1)
- 28 RB3-0160-000CN - Paper pickup roller ('D' shaped)
- 28 RG5-6952-000CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
- 28 RG5-6952-020CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
- 29
- 29 WT2-5700-000CN - Cable clamp - White plastic clamp with mounting pin
- 30
- 30 RG5-7131-000CN - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
- 33
- 33 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
- 33 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
- 33 RS5-1635-000CN - Shaft bushing for HP Color LaserJet 1500 Series
- 34
- 34 RF5-4047-000CN - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
- 36
- 36 RS6-8687-000CN - Label - Illustrates the imaging drum/transfer assembly cartridge removal procedure - Mounts on the upper internal cover
1
RB2-9952-000CN
Spring
Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
2
RB9-0890-000CN
Hinge
Tray hinge - 'L' shaped plastic arm - For the right side of the multipurpose front input tray (tray 1)
3
RB9-0889-000CN
Hinge
Tray hinge - 'L' shaped plastic arm - For the left side of the multi-purpose front input tray (tray 1)
4
RB2-3043-000CN
Bushing
Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
5
RB2-3044-000CN
Bushing
Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
6
RB2-6248-000CN
Damper
Damper assembly (Gray plastic piece with small 13-tooth gear on it)
7
Q3948-67914
Cover
Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
7
Q3948-67914
Cover
Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
7
RB3-1134-000CN
Cover
Internal cover (ONLY) - Curved plastic piece with recessed area for grasping the handle on the imaging drum/transfer assembly - Mounts towards the front of the printer just above the multipurpose tray
8
RB3-1135-000CN
Cover
Lower front cover - Rectangular plastic strip - Mounts just below the multipurpose input tray on the front of the printer
9
RB3-0104-000CN
Cover
Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
10
RB3-0111-000CN
Flag
Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
12
RB3-0120-020CN
Cover
Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
13
RB3-0121-000CN
Spring
Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
14
RB3-0122-000CN
Spring
Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
16
RH7-5383-000CN
Solenoid
Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
17
Q3948-67907
Roller
Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
17
RF5-4012-000CN
Pad
Separation pad assembly - Includes the separation pad, holder and spring
19
RS7-0418-000CN
Gear
26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
20
Q3948-67913
Gear
Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
20
Q3948-67928
Gear Assembly
Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
21
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
21
XB4-7401-005CN
Screw
M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
23
Q3948-67913
Gear
Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
23
Q3948-67928
Gear Assembly
Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
23
RS7-0429-000CN
Gear
26 tooth gear (White plastic) - Has recess for shaft drive pin
24
WG8-5593-000CN
PC Board
Sensor PC board - Small board with flag activated photosensor
25
RG5-7601-000CN
Tray Assembly
Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
26
Q3948-67913
Gear
Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
26
Q3948-67928
Gear Assembly
Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
26
RG5-6938-000CN
Gear
Gear assembly - Metal plate with two White plastic gears attached
26
RG5-6938-030CN
Gear Assembly
Gear assembly - Metal plate with two White plastic gears attached
27
RG5-7584-000CN
Guide
Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1)
28
Q3948-67907
Roller
Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
28
Q3948-67912
Roller
Paper pickup roller kit - Includes the `D` shaped the paper pickup roller assembly and the separation pad assembly - For the multipurpose front input tray (tray 1)
28
RG5-6952-000CN
Roller
Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
28
RG5-6952-020CN
Roller
Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
30
RG5-7131-000CN
Reader
E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
33
Q3948-67913
Gear
Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
33
Q3948-67928
Gear Assembly
Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
34
RF5-4047-000CN
Pad
Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
36
RS6-8687-000CN
Label
Label - Illustrates the imaging drum/transfer assembly cartridge removal procedure - Mounts on the upper internal cover
|