D2381-63001 is represented by #12 in the diagram below.
- 1
- 1 9170-1535 - Split ferrite - Installed inside electronics enclosure
- 1 9170-1535 - Split ferrite - Installed inside electronics enclosure
- 2
- 2 C3180-60007 - Trailing cable for HP DesignJet 220 D size
- 3
- 3 9170-1533 - Clamp - Holds ferrite in place within electronics enclosure
- 3 9170-1533 - Clamp - Holds ferrite in place within electronics enclosure
- 4
- 4 C3180-00004 - Electronics enclosure - The smaller of the two metal covers for the area containing the main PC board and power supply
- 5
- 5 C3180-60013 - Power supply insulator - Installed over power supply board
- 6
- 6 C2847-60005 - Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long
- 7
- 7 C3180-60006 - AC power receptacle assembly - Includes cable
- 9
- 9 3160-0814 - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM
- 10
- 10 C3180-00003 - Electronics enclosure - The larger of the two metal covers for the area containing the main PC board and power supply
- 11
- 11 0570-1316 - Machine screw/standoff (Textron R86-20000-382) - 4-40 thread, 9.4mm long, hex head - Steel
- 12
- 12 C2065A - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.
- 12 C2066A - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX
- 12 D2152-69001 - 8MB, 80nS, 36-bit SIMM memory module
- 12 D2156-69001 - 4MB, 80nS, 36-bit SIMM memory module
- 12 D2381-63001 - 2MB, 80nS, 36-bit SIMM memory module
- 13
- 13 1818-6016 - ROM - U28 on main logic board (Revision B.02.01)
- 13 1818-6017 - ROM - U29 on main logic board (Revision B.02.01)
- 13 1818-6521 - Masked ROM - U28 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty
- 13 1818-6522 - Masked ROM - U29 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty
1
9170-1535
Ferrite Assembly
Split ferrite - Installed inside electronics enclosure
1
9170-1535
Ferrite Assembly
Split ferrite - Installed inside electronics enclosure
2
C3180-60007
Cable
Trailing cable for HP DesignJet 220 D size
3
9170-1533
Clamp
Clamp - Holds ferrite in place within electronics enclosure
3
9170-1533
Clamp
Clamp - Holds ferrite in place within electronics enclosure
4
C3180-00004
Cover
Electronics enclosure - The smaller of the two metal covers for the area containing the main PC board and power supply
5
C3180-60013
Insulator
Power supply insulator - Installed over power supply board
6
C2847-60005
Cable
Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long
7
C3180-60006
Receptacle
AC power receptacle assembly - Includes cable
9
3160-0814
Fan
Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM
10
C3180-00003
Cover
Electronics enclosure - The larger of the two metal covers for the area containing the main PC board and power supply
11
0570-1316
Hardware
Machine screw/standoff (Textron R86-20000-382) - 4-40 thread, 9.4mm long, hex head - Steel
12
C2065A
Memory
4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.
12
C2066A
Memory
8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX
13
1818-6016
IC ROM
ROM - U28 on main logic board (Revision B.02.01)
13
1818-6017
IC ROM
ROM - U29 on main logic board (Revision B.02.01)
13
1818-6521
IC ROM
Masked ROM - U28 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty
13
1818-6522
IC ROM
Masked ROM - U29 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty
|