C8173-67019 is represented by #35 in the diagram below.
- 1
- 1 C8128-67016 - Top/front access door assembly - Print cartridge access door - Includes the access door and the main back panel
- 2
- 2 C8128-67003 - Left side end cap - Covers the left side of the printer
- 3
- 3 C8128-67004 - Right side end cap - Covers the right side of the printer
- 4
- 4 C2693-67007 - Power switch cable - Has 2-pin (F) connectors - 82.9cm (32.6in) long
- 4
- 4 C2693-67007 - Power switch cable - Has 2-pin (F) connectors - 82.9cm (32.6in) long
- 5
- 5 C2693-67019 - Paper input tray - Includes width adjuster
- 6
- 6 C2693-67002 - Paper output tray - Has a media width adjuster and a smoked plastic sliding extension for longer paper
- 7
- 7 C2693-67035 - Ink cartridge carriage assembly - Includes only the plastic frame
- 9
- 9 C2693-67015 - Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position
- 9 C2693-67082 - Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position
- 10
- 10 C2693-67016 - Carriage drive belt - Moves printhead side to side
- 11
- 11 C2693-67017 - Carriage drive motor assembly (includes pulley)
- 11 C8173-67020 - Carriage drive motor assembly (includes pulley)
- 12
- 12 C2693-67045 - Linefeed encoder PC board - Reads the linefeed encoder disk
- 12 C8173-67025 - Linefeed encoder PC board - Reads the linefeed encoder disk
- 13
- 13 C2693-67050 - Guide assembly - For the linefeed encoder disk
- 14
- 14 C2693-67044 - Output motor - Powers part of the output mechanism
- 14 C8173-67023 - Output motor - Powers part of the output mechanism
- 15
- 15 C8128-67013 - Rail cover - Mounts over the starwheel assembly
- 16
- 16 C2693-67027 - Starwheel assembly - Includes starwheel chassis assembly and starwheels
- 16 C8128-67011 - Starwheel assembly - Includes starwheel chassis assembly and starwheels
- 17
- 17 C2693-67024 - Output roller assembly - Roller assembly at the front of the printer (where the paper comes out) - Includes shaft with 10 rollers and surrounding internal and external plastic
- 18
- 18 C2693-67048 - Backbone assembly - Large metal frame where the main logic PCA, power supply, and the carriage drive motor are mounted
- 19
- 19 C2693-67023 - Upper paper guide - Guides media through paper path
- 20
- 20 C8128-67007 - Rear cleanout door assembly - Paper jam cleanout door
- 21
- 21 C2693-67018 - Pickup roller assembly - Shaft with 1 roller - Picks paper from paper input tray
- 22
- 22 C2693-67025 - Output belt - Drives the output roller
- 23
- 23 C2693-67030 - Rear access cleanout base assembly - Includes the base, kicker spring, rear roller springs, cleanout base rollers, and the pick separator assembly
- 23
- 23 C2693-67030 - Rear access cleanout base assembly - Includes the base, kicker spring, rear roller springs, cleanout base rollers, and the pick separator assembly
- 24
- 24 C2693-67043 - Left support assembly - Supports the left side of the print mechanism - Includes the index sensor and sensor harness
- 25
- 25 C2693-67049 - Right support assembly - Supports the right side of the print mechanism and the service station assembly
- 26
- 26 C2693-67039 - Complete service station assembly - Includes the service station motor, wiper assembly, and sponge
- 26 C8173-67021 - Complete service station assembly - Includes the service station motor, wiper assembly, and sponge
- 27
- 27 C2693-67020 - Drive roller assembly - Includes shaft with 6 rollers, pivot assembly, and gears - Does not include plastic encoder disc
- 29
- 29 C2693-67071 - Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor
- 29 C8128-67012 - Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor
- 30
- 30 C2693-67028 - Base plate assembly - Metal base plate that supports the printer
- 31
- 31 C8128-67010 - Grip/handle - Dark gray plastic on lower left and right side - Non-slip surface on each side for maneuvering printer
- 31
- 31 C8128-67010 - Grip/handle - Dark gray plastic on lower left and right side - Non-slip surface on each side for maneuvering printer
- 32
- 32 C2693-67034 - Extender guides - Plastic pieces that guide the extender - Mounts to the bottom of the metal base plate
- 32
- 32 C2693-67034 - Extender guides - Plastic pieces that guide the extender - Mounts to the bottom of the metal base plate
- 33
- 33 C2693-67053 - Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips
- 33
- 33 C2693-67053 - Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips
- 33
- 33 C2693-67053 - Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips
- 33
- 33 C2693-67053 - Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips
- 35
- 35 C2693-67012 - Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max
- 35 C8173-67019 - Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max
- 37
- 37 C2693-67037 - Spot sensor assembly
- 37 C8173-67024 - Spot sensor assembly - Mounts on the side of the carriage
1
C8128-67016
Door
Top/front access door assembly - Print cartridge access door - Includes the access door and the main back panel
2
C8128-67003
Cover
Left side end cap - Covers the left side of the printer
3
C8128-67004
Cover
Right side end cap - Covers the right side of the printer
4
C2693-67007
Cable
Power switch cable - Has 2-pin (F) connectors - 82.9cm (32.6in) long
5
C2693-67019
Tray
Paper input tray - Includes width adjuster
6
C2693-67002
Tray
Paper output tray - Has a media width adjuster and a smoked plastic sliding extension for longer paper
7
C2693-67035
Carriage
Ink cartridge carriage assembly - Includes only the plastic frame
9
C2693-67015
Encoder
Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position
9
C2693-67082
Encoder
Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position
10
C2693-67016
Belt
Carriage drive belt - Moves printhead side to side
11
C2693-67017
Motor
Carriage drive motor assembly (includes pulley)
11
C8173-67020
Motor
Carriage drive motor assembly (includes pulley)
12
C2693-67045
PC Board
Linefeed encoder PC board - Reads the linefeed encoder disk
12
C8173-67025
PC Board
Linefeed encoder PC board - Reads the linefeed encoder disk
13
C2693-67050
Guide
Guide assembly - For the linefeed encoder disk
14
C2693-67044
Motor
Output motor - Powers part of the output mechanism
14
C8173-67023
Motor
Output motor - Powers part of the output mechanism
15
C8128-67013
Cover
Rail cover - Mounts over the starwheel assembly
16
C2693-67027
Starwheel
Starwheel assembly - Includes starwheel chassis assembly and starwheels
16
C8128-67011
Starwheel
Starwheel assembly - Includes starwheel chassis assembly and starwheels
17
C2693-67024
Roller
Output roller assembly - Roller assembly at the front of the printer (where the paper comes out) - Includes shaft with 10 rollers and surrounding internal and external plastic
18
C2693-67048
Backbone
Backbone assembly - Large metal frame where the main logic PCA, power supply, and the carriage drive motor are mounted
19
C2693-67023
Guide
Upper paper guide - Guides media through paper path
20
C8128-67007
Door
Rear cleanout door assembly - Paper jam cleanout door
21
C2693-67018
Roller
Pickup roller assembly - Shaft with 1 roller - Picks paper from paper input tray
23
C2693-67030
Base
Rear access cleanout base assembly - Includes the base, kicker spring, rear roller springs, cleanout base rollers, and the pick separator assembly
24
C2693-67043
Support
Left support assembly - Supports the left side of the print mechanism - Includes the index sensor and sensor harness
25
C2693-67049
Support
Right support assembly - Supports the right side of the print mechanism and the service station assembly
26
C2693-67039
Service Station
Complete service station assembly - Includes the service station motor, wiper assembly, and sponge
26
C8173-67021
Service Station
Complete service station assembly - Includes the service station motor, wiper assembly, and sponge
27
C2693-67020
Roller
Drive roller assembly - Includes shaft with 6 rollers, pivot assembly, and gears - Does not include plastic encoder disc
29
C2693-67071
Cable
Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor
29
C8128-67012
Cable
Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor
30
C2693-67028
Base
Base plate assembly - Metal base plate that supports the printer
31
C8128-67010
Handle
Grip/handle - Dark gray plastic on lower left and right side - Non-slip surface on each side for maneuvering printer
32
C2693-67034
Guide
Extender guides - Plastic pieces that guide the extender - Mounts to the bottom of the metal base plate
33
C2693-67053
Maintenance Kit
Low usage kit - Includes bearings, springs, rollers, rubber feet, rod mounts, and ferrite clips
35
C2693-67012
Power Supply
Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max
35
C8173-67019
Power Supply
Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max
37
C8173-67024
Sensor
Spot sensor assembly - Mounts on the side of the carriage
|