| |
C4602-60004 is represented by #27 in the diagram below.
- 3
- 3 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
- 5
- 5 C2128-00006 - Separator spring - Provides pressure between the separator assembly and the center drive roller
- 6
- 6 C2128-40032 - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
- 7
- 7 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
- 9
- 9 C2128-00002 - Kicker spring - Provides tension for the kicker
- 10
- 10 C2145-00017 - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
- 11
- 11 C2145-67851 - Carriage assembly - Does not include trailing cable
- 12
- 12 C2128-40015 - Left lifter cap - Holds the pressure plate lifter in place
- 14
- 14 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
- 15
- 15 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
- 16
- 16 C2145-00033 - ESD spring - Installed between ESD blade and carriage PC board
- 16
- 16 C2145-00033 - ESD spring - Installed between ESD blade and carriage PC board
- 17
- 17 C5876-60066 - Service station motor - Drives the service station assembly
- 18
- 18 C5876-60103 - Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
- 19
- 19 C4602-80004 - Head drive flex cable - 43.2cm (17in) long
- 22
- 22 C4602-00014 - Bearing Plate - Provides smooth surface for Clutch Actuator to ride against
- 23
- 23 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
- 24
- 24 C4602-40036 - Belt clamp (attachment) - Secures the drive belt to carriage
- 25
- 25 C2128-80075 - Foam catch pad - Keeps paper catch from moving inadvertently
- 26
- 26 C4602-60040 - Carriage PC board - Does not include trailing cable
- 27
- 27 C4602-60004 - Paper motor - Drives paper through printer
- 28
- 28 C4602-67804 - Pickup roller assembly (Pivot) - Picks paper from paper input tray
- 29
- 29 C4555-67805 - Drive roller pre-loader - Applies tension to the drive roller shaft
- 31
- 31 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
- 33
- 33 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 33
- 33 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 34
- 34 C2145-00046 - Pivot spring - Provides tension for the pivot
- 35
- 35 C2145-40058 - Drive belt - For the print mechanism carriage assembly
- 36
- 36 C4555-67849 - Carriage Plate Assembly - Includes Carriage Plate, Upper Paper Guide, Antistatic Brush, Pivot Stop Adjuster, and Z Axis Service Station Adjustment (ZASSA)
- 38
- 38 C4602-00012 - Bias spring - Provides down pressure on the clutch actuator arm
- 39
- 39 C2145-80016 - Encoder strip - Carriage position sensor reference
- 40
- 40 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
- 41
- 41 C4602-69801 - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
- 42
- 42 C4555-60068 - Turnaround assembly - Holds belt tension components in place
- 43
- 43 C4602-40039 - Clutch actuator arm - Used to engage the pivot gears
- 45
- 45 C4602-60022 - Carriage motor - Provides power for carriage belt
- 47
- 47 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
- 48
- 48 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
3
C2145-40019
Lifter
Pressure plate lifter - Also known as lifter shaft or paper lifter
5
C2128-00006
Spring
Separator spring - Provides pressure between the separator assembly and the center drive roller
6
C2128-40032
Cap
Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
7
C2145-20007
Rod
Carriage rod - Shaft that the carriage assembly rides on
9
C2128-00002
Spring
Kicker spring - Provides tension for the kicker
10
C2145-00017
Spring
Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
11
C2145-67851
Carriage
Carriage assembly - Does not include trailing cable
12
C2128-40015
Cap
Left lifter cap - Holds the pressure plate lifter in place
14
C2145-40023
Kicker
Kicker - Restacks the paper in the paper input tray after the top sheet is removed
15
C2145-40020
Arm
Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
16
C2145-00033
Spring
ESD spring - Installed between ESD blade and carriage PC board
17
C5876-60066
Motor
Service station motor - Drives the service station assembly
18
C5876-60103
Cable
Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
22
C4602-00014
Plate
Bearing Plate - Provides smooth surface for Clutch Actuator to ride against
23
C2145-00018
Spring
Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
24
C4602-40036
Clamp
Belt clamp (attachment) - Secures the drive belt to carriage
25
C2128-80075
Pad
Foam catch pad - Keeps paper catch from moving inadvertently
26
C4602-60040
PC Board
Carriage PC board - Does not include trailing cable
28
C4602-67804
Roller
Pickup roller assembly (Pivot) - Picks paper from paper input tray
29
C4555-67805
Preloader
Drive roller pre-loader - Applies tension to the drive roller shaft
31
C2145-40101
Clamp
Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
33
C2145-40059
Adjuster
Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
34
C2145-00046
Spring
Pivot spring - Provides tension for the pivot
35
C2145-40058
Belt
Drive belt - For the print mechanism carriage assembly
36
C4555-67849
Plate
Carriage Plate Assembly - Includes Carriage Plate, Upper Paper Guide, Antistatic Brush, Pivot Stop Adjuster, and Z Axis Service Station Adjustment (ZASSA)
38
C4602-00012
Spring
Bias spring - Provides down pressure on the clutch actuator arm
39
C2145-80016
Strip
Encoder strip - Carriage position sensor reference
40
C4555-60067
Idler
Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
41
C4602-69801
Print Mechanism
Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
42
C4555-60068
Turnaround Assembly
Turnaround assembly - Holds belt tension components in place
43
C4602-40039
Arm
Clutch actuator arm - Used to engage the pivot gears
45
C4602-60022
Shield
Carriage motor - Provides power for carriage belt
47
C2145-40117
Clamp
Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
48
C2145-00042
Stiffener
Encoder stiffener - Prevents oscillation of encoder strip
|