|
| |
C4555-40005 is represented by #40 in the diagram below.
- 1
- 1 C4555-67803 - Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
- 4
- 4 C4531-69813 - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations - Used to replace all three types of print mechanisms
- 9
- 9 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
- 10
- 10 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
- 14
- 14 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
- 16
- 16 C5876-60103 - Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
- 17
- 17 C4531-60129 - Base assembly - Bottom cover with four rubber feet
- 18
- 18 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
- 19
- 19 C4531-60016 - Service station motor - Drives service station assembly
- 21
- 21 C4531-40011 - Carriage flex cable clip - Holds the flex cable
- 22
- 22 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
- 23
- 23 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 24
- 24 C4555-40063 - Chassis clamp - Retains chassis in the base assembly
- 25
- 25 C4531-80010 - Head drive flex cable - 41.9cm (16.5in) long
- 26
- 26 C4531-67803 - Head drive PCA - Has temperature and optical sensors - Drives the print cartridge
- 27
- 27 C4531-40009 - Belt attachment - Anchors drive belt to carriage
- 28
- 28 C4555-60068 - Turnaround assembly - Holds belt tension components in place
- 29
- 29 C4531-60062 - Paper motor - Drives paper through printer - Has horizontal teeth (Not helical) on drive gear
- 31
- 31 C4555-67804 - Pivot - Large plastic item which contains the Pickup Rollers
- 33
- 33 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
- 34
- 34 C2145-00046 - Pivot spring - Provides tension for the pivot
- 35
- 35 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 36
- 36 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
- 37
- 37 C2145-40058 - Drive belt - For the print mechanism carriage assembly
- 38
- 38 C2145-80016 - Encoder strip - Carriage position sensor reference
- 39
- 39 C4555-40066 - Clutch actuator arm - Used to engage the pivot gears
- 42
- 42 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
- 43
- 43 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
- 44
- 44 C4602-60022 - Carriage motor - Provides power for carriage belt
1
C4555-67803
Chassis
Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
4
C4531-69813
Print Mechanism
Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations - Used to replace all three types of print mechanisms
9
C2145-40019
Lifter
Pressure plate lifter - Also known as lifter shaft or paper lifter
10
C2145-20007
Rod
Carriage rod - Shaft that the carriage assembly rides on
14
C2145-40023
Kicker
Kicker - Restacks the paper in the paper input tray after the top sheet is removed
16
C5876-60103
Cable
Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
17
C4531-60129
Base
Base assembly - Bottom cover with four rubber feet
18
C2145-40020
Arm
Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
19
C4531-60016
Motor
Service station motor - Drives service station assembly
21
C4531-40011
Clip
Carriage flex cable clip - Holds the flex cable
22
C2145-00018
Spring
Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
23
C2145-40059
Adjuster
Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
24
C4555-40063
Clamp
Chassis clamp - Retains chassis in the base assembly
25
C4531-80010
Cable
Head drive flex cable - 41.9cm (16.5in) long
26
C4531-67803
PC Board
Head drive PCA - Has temperature and optical sensors - Drives the print cartridge
27
C4531-40009
Clamp
Belt attachment - Anchors drive belt to carriage
28
C4555-60068
Turnaround Assembly
Turnaround assembly - Holds belt tension components in place
29
C4531-60062
Motor
Paper motor - Drives paper through printer - Has horizontal teeth (Not helical) on drive gear
31
C4555-67804
Pivot
Pivot - Large plastic item which contains the Pickup Rollers
33
C2145-40101
Clamp
Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
34
C2145-00046
Spring
Pivot spring - Provides tension for the pivot
35
C2145-40059
Adjuster
Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
36
C4555-60067
Idler
Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
37
C2145-40058
Belt
Drive belt - For the print mechanism carriage assembly
38
C2145-80016
Strip
Encoder strip - Carriage position sensor reference
39
C4555-40066
Arm
Clutch actuator arm - Used to engage the pivot gears
42
C2145-00042
Stiffener
Encoder stiffener - Prevents oscillation of encoder strip
43
C2145-40117
Clamp
Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
44
C4602-60022
Shield
Carriage motor - Provides power for carriage belt
|
|