C3196-60057 printer parts diagram.

123
 

C3196-60057 is represented by #3 in the diagram below.

Electronics Enclosure
C3196-60057 is represented by #3 in the diagram below.
  • 1
    • 1 C4706-60092 - Electronic housing assembly (PC board enclosure)
  • 2
    • 2 C3196-60056 - Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
    • 2 C3196-60056 - Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
  • 3
    • 3 C3196-60057 - Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
    • 3 C3196-60057 - Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
  • 4
    • 4 C4705-60089 - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers
  • 5
    • 5 C3190-60137 - Tubeaxial fan for HP DesignJet 750C Series
  • 6
    • 6 C3195-00009 - SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly
  • 7
    • 7 C3195-80005 - RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
  • 7
    • 7 C3195-80005 - RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
  • 8
    • 8 C3196-60053 - Back cover/panel - Metal cover for the electronic enclosure assembly
  • 9
    • 9 C3195-69101 - Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports
  • 11
    • 11 C3195-80009 - Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.
  • 12
    • 12 J2550B - EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.
    • 12 J2555B - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
    • 12 J2590-69001 - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
    • 12 J2590A - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
    • 12 J2591A - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
    • 12 J2593-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
    • 12 J3264A - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
    • 12 J3265-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
    • 12 J4100-69001 - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
    • 12 J4100A - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
    • 12 J4100A - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
    • 12 J4100A - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
    • 12 J4100A - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
    • 12 J4101B - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
    • 12 J4102-69022 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
    • 12 J4106A - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector
  • 13
    • 13 J2382-69003 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
    • 13 J2550-69013 - EtherTwist 10Base-T LAN interface board
    • 13 J2552B - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
    • 13 J2555-69013 - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
    • 13 J2591-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
    • 13 J2592-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
    • 13 J2594-69001 - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
    • 13 J3258-61011 - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
    • 13 J3258-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
    • 13 J3258-61041 - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
    • 13 J3258B - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
    • 13 J3265G - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
    • 13 J4102-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
    • 13 J4102B - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
    • 13 J4105A - JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors
  • 13
    • 13 0950-2623 - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
  • 14
    • 14 C3190-00016 - Insulator - Mounts between the power supply and main cover/panel of the electronic enclosure assembly
  • 15
    • 15 C3195-60149 - AC wiring harness - Includes power switch, AC receptacle, and connector
1
C4706-60092 Housing Electronic housing assembly (PC board enclosure)
2
C3196-60056 Cable Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
2
C3196-60056 Cable Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
3
C3196-60057 Cable Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
3
C3196-60057 Cable Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
4
C4705-60089 Gear Assembly Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers
5
C3190-60137 Fan Tubeaxial fan for HP DesignJet 750C Series
6
C3195-00009 Cover SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly
7
C3195-80005 Shield RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
7
C3195-80005 Shield RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
8
C3196-60053 Cover Back cover/panel - Metal cover for the electronic enclosure assembly
9
C3195-69101 PC Board Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports
10
5041-1203 Keycap Power switch keycap (White)
10
C1633-00031 Cover MIO slot access cover
11
C3195-80009 Cable Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.
12
J2550B PC Board Interface EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.
12
J2555B PC Board Interface JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
12
J2590-69001 Module External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
12
J2590A PC Board Interface External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
12
J2591A PC Board Interface External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
12
J2593-69001 Module External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
12
J3264A PC Board Interface HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
12
J3265-69001 PC Board Interface External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
12
J4100-69001 PC Board JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
12
J4100A PC Board Interface JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
12
J4101B PC Board Interface HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
12
J4102-69022 Module External JetDirect LAN interface module with EtherTwist (10Base-T) connector
12
J4106A PC Board Interface JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector
13
0950-2623 Power Supply Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
13
J2382-69003 Module External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
13
J2550-69013 PC Board EtherTwist 10Base-T LAN interface board
13
J2552B PC Board Interface LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
13
J2555-69013 PC Board JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
13
J2591-69001 PC Board Interface External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
13
J2592-69001 Module External JetDirect LAN interface module with EtherTwist (10Base-T) connector
13
J2594-69001 PC Board Interface External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
13
J3258-61011 PC Board External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
13
J3258-61021 Module External JetDirect LAN interface module with EtherTwist (10Base-T) connector
13
J3258-61041 PC Board Interface External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
13
J3258B PC Board Interface External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
13
J3265G PC Board Interface HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
13
J4102-61021 Module External JetDirect LAN interface module with EtherTwist (10Base-T) connector
13
J4102B PC Board Interface External JetDirect LAN interface module with EtherTwist (10Base-T) connector
13
J4105A PC Board Interface JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors
14
C3190-00016 Insulator Insulator - Mounts between the power supply and main cover/panel of the electronic enclosure assembly
15
C3195-60149 Harness AC wiring harness - Includes power switch, AC receptacle, and connector
123
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.