| |
C2890-80026 is represented by #39 in the diagram below.
- 1
- 1 C2164-60045 - Paper stepper motor assembly (does NOT include cable)
- 5
- 5 9170-1616 - Toroid - for Control Panel Ribbon Cable and Paper Motor
- 6
- 6 C2124-60115 - Carriage motor - Drives the carriage belt
- 7
- 7 C2890-60052 - Print mechanism chassis assembly - The base structure of the print mechanism
- 9
- 9 C2890-60023 - Pen driver ribbon cable - 27cm (10.5in) long
- 9
- 9 C2890-60023 - Pen driver ribbon cable - 27cm (10.5in) long
- 10
- 10 C2890-40070 - Lever arm - Used to lift the pressure plate lifter
- 11
- 11 C2890-20006 - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
- 12
- 12 C2890-40068 - Left/right lifter cap - Holds the pressure plate lifter in place
- 12
- 12 C2890-40068 - Left/right lifter cap - Holds the pressure plate lifter in place
- 13
- 13 C2890-40071 - Separator lifter - Installed between the separator and the pressure plate lifter
- 14
- 14 C2890-40075 - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
- 15
- 15 C2128-00002 - Kicker spring - Provides tension for the kicker
- 16
- 16 C2128-00006 - Separator spring - Provides pressure between the separator assembly and the center drive roller
- 17
- 17 C2890-40072 - Separator peg - Lifts the separator pad when the lifter shaft lifts
- 18
- 18 C2128-00003 - Helper spring - Used to lift the pressure plate assembly
- 19
- 19 C2890-60049 - Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers
- 20
- 20 C2128-00051 - Carriage belt damper - Installed under right end of carriage belt
- 22
- 22 C2890-60079 - Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position
- 23
- 23 C2890-40076 - Adjuster - Used to adjust pen-to-paper spacing
- 25
- 25 C2171-67806 - Idler pulley - Holds left end of carriage belt
- 26
- 26 C2890-40063 - Belt tension bracket - Holds the carriage belt idler pulley
- 27
- 27 C2124-20004 - Belt spring - For belt tension bracket
- 29
- 29 C2890-40073 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
- 32
- 32 C2890-60076 - Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
- 33
- 33 C4549-00002 - Paper guide - Holds the upper pinch rollers and springs
- 34
- 34 C2124-60162 - Upper pinch roller and spring assembly
- 34
- 34 C2124-60162 - Upper pinch roller and spring assembly
- 34
- 34 C2124-60162 - Upper pinch roller and spring assembly
- 35
- 35 C2124-20008 - Limiter spring - Provides tension for rotation limiter
- 36
- 36 C2890-40067 - Rotation limiter - Limits the rotation of the pivot
- 38
- 38 C2124-00009 - Spring - Installed in spittoon assembly
- 39
- 39 C2890-80026 - Ink absorber for HP OfficeJet 330 Series
- 40
- 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
- 40
- 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
- 40
- 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
- 40
- 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
- 41
- 41 C2113-40006 - Wiper - Cleans ink and debris from print nozzles
- 42
- 42 C2890-60080 - Service station assembly - Includes service station base (frame) and sled retainer
- 42
- 42 C2890-60080 - Service station assembly - Includes service station base (frame) and sled retainer
- 44
- 44 C2890-40108 - OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
- 45
- 45 C2164-40060 - Carriage belt for HP DeskJet 550C Series
- 46
- 46 C2124-80008 - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
- 47
- 47 C2124-20001 - Rear rail - Supports carriage assembly
- 48
- 48 C2124-00001 - Encoder spring - Provides tension for encoder strip
- 49
- 49 C2170-00002 - Carriage rod retainer - Holds left end of carriage rod
- 50
- 50 C2165-00001 - Left bracket - Carriage rod adjustment bracket (Left)
- 51
- 51 C2170-00008 - Right bracket - Carriage rod adjustment bracket (Right)
- 52
- 52 C2162-20005 - Carriage rod - Supports horizontal carriage movement
- 53
- 53 C2890-60082 - Carriage assembly - Includes flex cable and bushings
1
C2164-60045
Motor
Paper stepper motor assembly (does NOT include cable)
5
9170-1616
Toroid
Toroid - for Control Panel Ribbon Cable and Paper Motor
6
C2124-60115
Motor
Carriage motor - Drives the carriage belt
7
C2890-60052
Chassis
Print mechanism chassis assembly - The base structure of the print mechanism
9
C2890-60023
Cable
Pen driver ribbon cable - 27cm (10.5in) long
10
C2890-40070
Arm
Lever arm - Used to lift the pressure plate lifter
11
C2890-20006
Spring
Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
12
C2890-40068
Cap
Left/right lifter cap - Holds the pressure plate lifter in place
13
C2890-40071
Lifter
Separator lifter - Installed between the separator and the pressure plate lifter
14
C2890-40075
Cap
Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
15
C2128-00002
Spring
Kicker spring - Provides tension for the kicker
16
C2128-00006
Spring
Separator spring - Provides pressure between the separator assembly and the center drive roller
17
C2890-40072
Peg
Separator peg - Lifts the separator pad when the lifter shaft lifts
18
C2128-00003
Spring
Helper spring - Used to lift the pressure plate assembly
19
C2890-60049
Plate
Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers
20
C2128-00051
Damper
Carriage belt damper - Installed under right end of carriage belt
22
C2890-60079
Holder
Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position
23
C2890-40076
Adjuster
Adjuster - Used to adjust pen-to-paper spacing
25
C2171-67806
Idler
Idler pulley - Holds left end of carriage belt
26
C2890-40063
Bracket
Belt tension bracket - Holds the carriage belt idler pulley
29
C2890-40073
Kicker
Kicker - Restacks the paper in the paper input tray after the top sheet is removed
32
C2890-60076
Roller
Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
33
C4549-00002
Guide
Paper guide - Holds the upper pinch rollers and springs
35
C2124-20008
Spring
Limiter spring - Provides tension for rotation limiter
36
C2890-40067
Limiter
Rotation limiter - Limits the rotation of the pivot
40
C2890-60084
Sled
Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
41
C2113-40006
Wiper
Wiper - Cleans ink and debris from print nozzles
42
C2890-60080
Service Station
Service station assembly - Includes service station base (frame) and sled retainer
44
C2890-40108
Flag
OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
46
C2124-80008
Strip
Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
48
C2124-00001
Spring
Encoder spring - Provides tension for encoder strip
49
C2170-00002
Retainer
Carriage rod retainer - Holds left end of carriage rod
50
C2165-00001
Bracket
Left bracket - Carriage rod adjustment bracket (Left)
51
C2170-00008
Bracket
Right bracket - Carriage rod adjustment bracket (Right)
52
C2162-20005
Rod
Carriage rod - Supports horizontal carriage movement
53
C2890-60082
Carriage
Carriage assembly - Includes flex cable and bushings
|