|
| |
C2145-40023 is represented by #15 in the diagram below.
- 1
- 1 C4555-67803 - Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
- 2
- 2 C4555-67805 - Drive roller pre-loader - Applies tension to the drive roller shaft
- 5
- 5 C4555-69801 - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
- 10
- 10 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
- 11
- 11 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
- 15
- 15 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
- 17
- 17 C4555-60061 - Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
- 19
- 19 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
- 22
- 22 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
- 23
- 23 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 24
- 24 C4555-40063 - Chassis clamp - Retains chassis in the base assembly
- 26
- 26 C4531-40009 - Belt attachment - Anchors drive belt to carriage
- 27
- 27 C4555-60068 - Turnaround assembly - Holds belt tension components in place
- 28
- 28 C4555-60005 - Paper drive motor - Drives media through printer
- 30
- 30 C4555-67804 - Pivot - Large plastic item which contains the Pickup Rollers
- 32
- 32 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
- 33
- 33 C2145-00046 - Pivot spring - Provides tension for the pivot
- 34
- 34 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 35
- 35 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
- 36
- 36 C2145-40058 - Drive belt - For the print mechanism carriage assembly
- 37
- 37 C2145-80016 - Encoder strip - Carriage position sensor reference
- 38
- 38 C4555-40066 - Clutch actuator arm - Used to engage the pivot gears
- 41
- 41 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
- 42
- 42 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
1
C4555-67803
Chassis
Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
2
C4555-67805
Preloader
Drive roller pre-loader - Applies tension to the drive roller shaft
5
C4555-69801
Print Mechanism
Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
10
C2145-40019
Lifter
Pressure plate lifter - Also known as lifter shaft or paper lifter
11
C2145-20007
Rod
Carriage rod - Shaft that the carriage assembly rides on
15
C2145-40023
Kicker
Kicker - Restacks the paper in the paper input tray after the top sheet is removed
17
C4555-60061
Cable
Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
19
C2145-40020
Arm
Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
22
C2145-00018
Spring
Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
23
C2145-40059
Adjuster
Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
24
C4555-40063
Clamp
Chassis clamp - Retains chassis in the base assembly
26
C4531-40009
Clamp
Belt attachment - Anchors drive belt to carriage
27
C4555-60068
Turnaround Assembly
Turnaround assembly - Holds belt tension components in place
28
C4555-60005
Motor
Paper drive motor - Drives media through printer
30
C4555-67804
Pivot
Pivot - Large plastic item which contains the Pickup Rollers
32
C2145-40101
Clamp
Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
33
C2145-00046
Spring
Pivot spring - Provides tension for the pivot
34
C2145-40059
Adjuster
Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
35
C4555-60067
Idler
Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
36
C2145-40058
Belt
Drive belt - For the print mechanism carriage assembly
37
C2145-80016
Strip
Encoder strip - Carriage position sensor reference
38
C4555-40066
Arm
Clutch actuator arm - Used to engage the pivot gears
41
C2145-00042
Stiffener
Encoder stiffener - Prevents oscillation of encoder strip
42
C2145-40117
Clamp
Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
|
|