|
| |
C2145-40023 is represented by #13 in the diagram below.
- 1
- 1 C2145-69801 - Complete mechanism - Includes mechanical carriage movement, paper picking and service station operations
- 7
- 7 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
- 8
- 8 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
- 12
- 12 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
- 13
- 13 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
- 15
- 15 C4555-60061 - Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
- 18
- 18 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
- 19
- 19 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 20
- 20 C4531-40009 - Belt attachment - Anchors drive belt to carriage
- 21
- 21 C4555-40063 - Chassis clamp - Retains chassis in the base assembly
- 23
- 23 C2145-67804 - Pivot - Large plastic item which contains the pickup rollers
- 24
- 24 C4555-60068 - Turnaround assembly - Holds belt tension components in place
- 25
- 25 C2145-60010 - Paper drive motor - Drives paper through printer
- 27
- 27 C2145-40058 - Drive belt - For the print mechanism carriage assembly
- 29
- 29 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
- 30
- 30 C2145-00046 - Pivot spring - Provides tension for the pivot
- 31
- 31 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
- 33
- 33 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
- 34
- 34 C2145-80016 - Encoder strip - Carriage position sensor reference
- 35
- 35 C4555-40066 - Clutch actuator arm - Used to engage the pivot gears
- 36
- 36 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
- 38
- 38 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
1
C2145-69801
Print Mechanism
Complete mechanism - Includes mechanical carriage movement, paper picking and service station operations
7
C2145-40019
Lifter
Pressure plate lifter - Also known as lifter shaft or paper lifter
8
C2145-20007
Rod
Carriage rod - Shaft that the carriage assembly rides on
12
C2145-40020
Arm
Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
13
C2145-40023
Kicker
Kicker - Restacks the paper in the paper input tray after the top sheet is removed
15
C4555-60061
Cable
Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
18
C2145-00018
Spring
Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
19
C2145-40059
Adjuster
Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
20
C4531-40009
Clamp
Belt attachment - Anchors drive belt to carriage
21
C4555-40063
Clamp
Chassis clamp - Retains chassis in the base assembly
23
C2145-67804
Pivot
Pivot - Large plastic item which contains the pickup rollers
24
C4555-60068
Turnaround Assembly
Turnaround assembly - Holds belt tension components in place
25
C2145-60010
Motor
Paper drive motor - Drives paper through printer
27
C2145-40058
Belt
Drive belt - For the print mechanism carriage assembly
29
C2145-40101
Clamp
Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
30
C2145-00046
Spring
Pivot spring - Provides tension for the pivot
31
C2145-40059
Adjuster
Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
33
C4555-60067
Idler
Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
34
C2145-80016
Strip
Encoder strip - Carriage position sensor reference
35
C4555-40066
Arm
Clutch actuator arm - Used to engage the pivot gears
36
C2145-00042
Stiffener
Encoder stiffener - Prevents oscillation of encoder strip
38
C2145-40117
Clamp
Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
|
|