|
RB1-7284-000CN
Delivery roller #1 - White 'Multi-ridged' roller - Four are used in delivery assembly
|
C6090-60081
Maintenance kit - Includes screws, label, ferrite, trailing clip, detect assembly, encoder holder, tool assembly, foam, trailing cable assemby, strip encoder, pulley assembly, tensioner assemby, 42-inch and 60-inch carriage belts and carriage cover
|
Q5999A
Maintenance kit - For 220 VAC - Includes fusing assembly, three separation rollers, transfer roller, three paper feed rollers, pick-up roller, and instruction manual
|
RL1-1443-000CN
Small Paper pickup D size roller - Picks up media from the paper input tray - for LaserJet Printer models.
|
|
RB1-9181-020CN
Exit roller - Shaft with three rubber rollers - Located in fusing assembly
|
CC468-67921
Paper pick-up roller and separation pad assembly - Use for the 250-sheet cassette tray 2 and tray 3
|
5181-2257
Fusing assembly (For 240V, 50Hz operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains ten new fusing assemblies)
|
C3914-67903
Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed
|
W1B47A
pagewide adf maintenance kit
|
RM1-2743-000cn
Replacement for part RM1-2743-000CN Fuser Assembly (200 - 240VAC) - Bonds toner to paper by heat
|
RB1-6251-000CN
Lower delivery roller - Presses against the lower delivery roller shaft assembly
|
|
RG5-1833-090CN
Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it
|
RF5-0349-000CN
Transfer roller - Goes in paper guide/high voltage contact plate assembly
|
Q1292-60211
Feed roller assembly - Includes encoder disk and paper-axis motor assembly - Feeds media under the carriage assembly
|
|
RM1-4248-020CN
Fuser Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation
|
C2037-67910
Maintenance kit (120V) - Includes Fuser Assembly separation pad transfer roller multipurpose pickup roller upper cassette pickup roller and lower cassette pickup roller
|
RM1-4969-000CN
Registration assembly - Set of rollers before toner cartridge and after feed rollers - For duplex models only
|
RM1-3161-080CN
Electrostatic Transfer Belt (ETB) drive assembly - Gear assembly between ETB motor and ETB assembly
|
RM1-0649-000CN
Fusing assembly - Bonds toner to paper with heat - For 110V to 127VAC (+/- 10%) operation - Mounts in the upper rear of the printer
|
RF5-1834-000CN
Feed/separation roller - Has a blue gear on one end and blue release tab on the other
|
C7769-60164
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
|
C9656-69019
Fuser Assembly - 220 volts Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC to 240VAC operation
|
Q1277-60032
CALIBRATION SHEET Calibration sheet - For the DesignJet T1100 MFP 4500mfp 4500 Scanner 820 MFP printer series
|
|
H3978-60001
LaserJet 2200 series Maintenance Kit (120V) - Includes fuser roller assembly, transfer roller assembly, Tray 1 and Tray 2 pickup rollers, Tray 1 and Tray 2 separation pads - Procedure requires use of service manual - Not for warranty use
|
CF367-67928
Fusing assembly - For 110 VAC operation - Bonds toner to the paper with heat
|
C8556A
Fusing assembly - Bonds toner to paper with heat - For Color LaserJet 9500 series
|
C5374-60021
Postscan roller - Shaft with 2 rollers - Mounts on underside of the lower ADF chassis
|
CN583-67008
Saipan Supplies Kit Service (Efigs)Service Printhead 4-slot officejet.
|
RG5-7692-250CN
LaserJet 5550 Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC/240VAC operation
|
C8563A
Magenta imaging drum assembly - Includes the photosensitive drum (or OPC), developing cylinder, and a small amount of toner (for priming) - Life expectancy is approximately 40,000 pages
|
RM1-2763-000CN
Printer Fuser Assembly (For 100 to 120VAC operation) - Bonds toner to paper with heat
|
|