| |
|
|
823793-001
System I/O board (motherboard) assembly - Includes the system I/O board, alcohol pad, and thermal grease
|
|
|
780307-001
SAS interface rackmount kit - Includes cabling and SAS interface - For use with 1U and 3U rackmount
|
|
|
775402-001
SAS/SATA backplane board - For the front 4-bay large form factor (LFF) hard drive cage - Up to 12Gbs transfer speed - Mounts on the rear of the drive cage
|
736859-001
NVIDIA Quadro K6000 Graphics Accelerator board - Requires two PCIe3 x16 slot - Has 12 GB GDDR5 memory with 288GB/sec bandwidth, 2880 CUDA (Compute Unified Device Architecture) cores, and integrated fan - Has two DVI-D port and two DP 1.2 ports
|
780968-001
2-slot power supply backplane board (standard) - Mounts in the chassis at the back of the power supply cages
|
738770-001
Power/management PCA pass-thru rear FC board
|
842935-001
PCA mother board - For use with ML10 Gen9
|
809948-001
Backplane board assembly - For the front 24-bay small form factor (SFF) drive cage
|
824567-001
Front panel board - Includes the power button with LED, UID button with LED, NIC status LED, front drive status LED, health LED, and USB connector - Mounts on the right rack ear assembly
|
|
|
825094-001
System board assembly (includes alcohol pad and thermal compound) - For use with ML30
|
761879-001
Smart Array PCIe SAS expansion board - For increased disk storage capacity - Requires one PCIe3 x8 slot - Has nine internal x4 mini-SAS ports (two for connecting to the controller board and up to seven to connect to three drive cages and rear drives)
|
403718-002
USB interface and cable rackmount kit - Includes cables, bracket and interface - For use with 1U rackmount
|
809947-001
Backplane board assembly - For the front 12-bay large form factor (LFF) drive cage
|
843307-001
System I/O board (motherboard) assembly - For Intel Xeon E5-2600 series v3 (Haswell) and v4 (Broadwell) processors - Includes the system I/O board, alcohol pad, thermal grease, and installation instruction card
|
779979-001
SAS/SATA backplane board - For the rear 3-bay large form factor (LFF) hard drive cage, up to 12Gbs transfer speed
|
|
|
|
|
715290-001
Graphics expansion control board - PCI Express, Gen8
|
820254-001
PCA motherboard - For use with BL460c Gen9 V2
|
756822-001
NVIDIA GRID K2 RAF Graphics Accelerator board - Requires two PCIe3 x16 slot - Has two GK104 GPUs, 8GB GDDR5 total memory (4GB per GPU), 3072 CUDA (Compute Unified Device Architecture) cores, and 8-pin aux power connector
|
766915-001
NVIDIA Tesla K40C Graphics Accelerator board - Requires two PCIe3 x16 slot - Has 12GB GDDR5 memory with 288GB/sec bandwidth, 2880 CUDA (Compute Unified Device Architecture) cores, and integrated fan
|
|
|
|
|
841389-001
PCA motherboard - For use with ML350 Gen9
|
|
|
519320-001
Disk enclosure - Input-output (I/O) module, SAS interface, small form factor (SFF)
|
779085-001
3-slot PCI riser board - Has three PCIe3 x8 full-height, full-length slots - Can be installed in either primary or secondary PCIe riser slot (A second processor is required to support installation in the secondary PCIe riser slot)
|
|
|
519323-001
Fan interconnection board - 26AWG 1.7cm (0.66in) long cable assembly
|
744412-001
SAS/SATA Hard drive backplane - For use with BL460c Gen9
|
851147-001
System I/O board (motherboard) assembly - For Intel Xeon E5-2600 series v3 (Haswell) and v4 (Broadwell) processors - Includes two processor sockets, sixteen DIMM slots (eight/processor), thermal grease, alcohol pads and processor replacement instructions
|
|